
-
Senior Member
Four Rings
Post pics of your boost gauge
I wanna get a boost gauge, but cant decide which one to choose, since gauge might look different installed compare to when you see it just by itself
-
Registered Member
Four Rings
-
Active Member
Two Rings
APR 91, Carbonio, Forge, H&R Sport , Koni Yellow, RS4 Sway, Labree HFC, TT Downpipe
-
Veteran Member
Four Rings
best photo i could find of mine:
2004 Audi A4 1.8T // quattro // 6 Speed // Brilliant Red
Built 1.8T || AEB || revo || GT3076R
1991 BMW ///M5 3.6 // 5 Speed // Macao Blue Metallic
BetaAlphaTau Member #111
-
Senior Member
Two Rings
 Originally Posted by onceover
best photo i could find of mine:
^same  , but mine's angled towards the driver a lil bit... which I love.
-Chandler USP front | Forge Splitter | CiM Boost Gauge ...and still slow. 
-
Senior Member
Four Rings
 Originally Posted by B6 1.8T
^same  , but mine's angled towards the driver a lil bit... which I love.

that is my exact setup (except my needle sits at 17 under WOT  )
2002 B6 A4 1.8TQM Sport suspension swap, RS4 rear Swaybar, joey mod, plasti-dipped front grills, and rear trunk trim.
Diode Mod!!
-Andrew
-
Senior Member
Four Rings
What about a-pillar gauges and tilted to the left?
-
Stage 2 Banner Advertiser
Four Rings
If you want a vent solution get the AWE package as it is the best, but if you wanted steering column solution let me know and I'll answer any questions you might have.
Last edited by greg@podi.ca; 04-15-2010 at 11:26 AM.
Podi offers free shipping to Audizine members! Use promo code AZNOSHIP at checkout!
-
Active Member
Two Rings
+1 for Podi. I love mine and with a bit of color matching magic at Home Depot it looks stock with a non-black interior. I'll snap some photos this afternoon after work and tonight to give a day/night comparison and update this post.
Last edited by Allhailpoptart; 04-16-2010 at 02:08 PM.
-
Account Terminated
Four Rings
VEI DIGITAL PODI DOING WORK BABY!!! NO Pic Just Vid
-
Veteran Member
Four Rings
 Originally Posted by secnd2no1
VEI DIGITAL PODI DOING WORK BABY!!! NO Pic Just Vid
That just looks annoying. lol
-
Veteran Member
Four Rings
 Originally Posted by gq9
That just looks annoying. lol
I didn't mean it in a bad way. lol just looks like it would become annoying fast, so bright...
-
Account Terminated
Four Rings
 Originally Posted by gq9
I didn't mean it in a bad way. lol just looks like it would become annoying fast, so bright...
its not bright at all u can actually dim it on the Podi to your own likings
-
Account Terminated
Four Rings
Not annoying at all ... sorry for ure discomfort
-
Veteran Member
Four Rings
^those pics kinda suck sorry ill get better ones
DD - 2012 MazdaSpeed3
2003 A4 1.8TQ
APR stg2+, 240mm S4 clutch, 12lbs flywheel, MTM injectors, Ecode FMIC, PSi testpipe, Techtonics Tuning downpipe, Hyperboost DV, B5S4 calipers, Goodridge SS lines, Stern snub, motor and transmission mounts, 42DD catch can, Podi, Vogtland Jr. Cup Kit, RS4 Rear Sway Bar, USP front and spacers front and rear
-
Veteran Member
Four Rings
Podi
Everyone asks if it was stock then says it looks good
DD - 2012 MazdaSpeed3
2003 A4 1.8TQ
APR stg2+, 240mm S4 clutch, 12lbs flywheel, MTM injectors, Ecode FMIC, PSi testpipe, Techtonics Tuning downpipe, Hyperboost DV, B5S4 calipers, Goodridge SS lines, Stern snub, motor and transmission mounts, 42DD catch can, Podi, Vogtland Jr. Cup Kit, RS4 Rear Sway Bar, USP front and spacers front and rear
-
Senior Member
Four Rings
Daytime:
Night:
Unfortunately, I was getting my car detailed last week and the guys left some type of solvent on my gauge and it turned the black casing BRIGHT GOLD. I have no idea wtf chemical did that, but I kind of hate it.
-
Veteran Member
Two Rings
[IMG]  [/IMG]
[IMG]  [/IMG]
APR K04, APR Exhaust, RaceTec FMIC, South Bend OFE HD Clutch, Koni Coilovers, H-Sport S4 Sways, B6 S4 Brakes, 18" ASA AR1s, Neuspeed Xtreme intake, Neuspeed short shifter, APR snub mount, Stratmosphere Hyperboost HX Compact DV
-
Account Terminated
Four Rings
 Originally Posted by StEvO
[IMG]  [/IMG]
[IMG]  [/IMG]
this is interesting and cool!!
 Originally Posted by RLB6
I represent myself and dougyfresh with this one cause we have pretty much the exact setup:

Thats awesome
-
Senior Member
Three Rings
 Originally Posted by StEvO
[IMG]  [/IMG]
[IMG]  [/IMG]
Nice work! Did you paint the whole plastic cover or just the housing you mounted the gauge inside?
-
Veteran Member
Two Rings
 Originally Posted by FoRbAnNa
Nice work! Did you paint the whole plastic cover or just the housing you mounted the gauge inside?
I painted the gauge housing and the dash trim piece.
Here's a link to the original post.
http://www.audizine.com/forum/showth...all&highlight=
Last edited by StEvO; 04-16-2010 at 12:58 PM.
APR K04, APR Exhaust, RaceTec FMIC, South Bend OFE HD Clutch, Koni Coilovers, H-Sport S4 Sways, B6 S4 Brakes, 18" ASA AR1s, Neuspeed Xtreme intake, Neuspeed short shifter, APR snub mount, Stratmosphere Hyperboost HX Compact DV
-
Veteran Member
Four Rings
EDIT: My bad, didn't scroll far enough to see you'd posted the thread, thx anyway. Still love this setup.
I vaguely remember seeing a thread about this setup somewhere? (assuming it was yours)
Is this totally custom or did you piece it together? Looks awesome. Very low profile, I like it.
 Originally Posted by StEvO
[IMG][url=http://www.audizine.com/gallery/showphoto.php?photo=27738&title=gauge-2&cat=500] 
Last edited by a4darkness; 05-29-2010 at 12:43 AM.
Reason: I'm an assjacket.
-
Veteran Member
Four Rings
I represent myself and dougyfresh with this one cause we have pretty much the exact setup:
-
Veteran Member
Four Rings
Last edited by A4natomical; 02-10-2011 at 10:36 PM.
Kyle
2.0L Revo GTRS Eliminator-Scat Rods-JE Pistons-Ferrea Valvetrain-2.0 AEG Crank-Bosch 550 Injectors-034 HFC-Custom Exhaust-Magnaflow Mufflers-ER Comp FMIC-Neuspeed TIP-034 Breather Hoses-Tein Super Street Coilovers-RS4 Sway Bar-Stern V2-Neuspeed Snub-034 Phenolic Intake Spacer-Podi Stepper Gauge-H&R Wheel Spacers (10mmF,15mmR)-235/40/R18-Michelin Pilot Super Sports-S4 Mirrors-Rieger Front Splitter-Relak Side Skirts-Lamin-X 6%Tails
-
Account Terminated
Four Rings
 Originally Posted by A4natomical
ahhh steering wheel...... So jealous ... love the silver Trimming
-
Senior Member
Three Rings
Anyone on here use the VDO boost gauge in a steering pod?
I quite like the VDO look.
I'm waiting for the P2 so I can have Oil pressure and Boost
-
Account Terminated
Four Rings
 Originally Posted by TwinTipSkier
Anyone on here use the VDO boost gauge in a steering pod?
I quite like the VDO look.
I'm waiting for the P2 so I can have Oil pressure and Boost
my friend has one on his GLI
-
Stage 2 Banner Advertiser
Four Rings
 Originally Posted by TwinTipSkier
Anyone on here use the VDO boost gauge in a steering pod?
I quite like the VDO look.
I'm waiting for the P2 so I can have Oil pressure and Boost
VDO boost gauge will not fit in my pod as the brass fitting off the back of it is very long and does not clear the back of the pod.
-
Senior Member
Four Rings
stevo and rlb6 what kind of gauges are those? And where can I get them? They look more stealth than anything else I have seen
-
Veteran Member
Two Rings
 Originally Posted by BASARAB
stevo and rlb6 what kind of gauges are those? And where can I get them? They look more stealth than anything else I have seen
http://www.dynotunenitrous.com/store...?idproduct=131
APR K04, APR Exhaust, RaceTec FMIC, South Bend OFE HD Clutch, Koni Coilovers, H-Sport S4 Sways, B6 S4 Brakes, 18" ASA AR1s, Neuspeed Xtreme intake, Neuspeed short shifter, APR snub mount, Stratmosphere Hyperboost HX Compact DV
-
Senior Member
Four Rings
 Originally Posted by StEvO
Did it come with all wiring and tubes needed?
-
Veteran Member
Two Rings
 Originally Posted by BASARAB
Did it come with all wiring and tubes needed?
Wiring and sensor. Yes
Tubing and fittings. No
APR K04, APR Exhaust, RaceTec FMIC, South Bend OFE HD Clutch, Koni Coilovers, H-Sport S4 Sways, B6 S4 Brakes, 18" ASA AR1s, Neuspeed Xtreme intake, Neuspeed short shifter, APR snub mount, Stratmosphere Hyperboost HX Compact DV
-
Senior Member
Four Rings
- Josh
Boosted, Bagged, Stretched, Pulled, and Fitted
The Golden Build > Thread
-
Senior Member
Two Rings
 Originally Posted by a408
That trim looks amazing where or how did you do that?
-
Account Terminated
Four Rings
 Originally Posted by jbsarra19
That trim looks amazing where or how did you do that?
thats looks good
-
Senior Member
Four Rings
 Originally Posted by jbsarra19
That trim looks amazing where or how did you do that?
just went to a local fabric store and picked it out. then wrapped all the trim in it following the a4mods write up. it wasnt easy but the results were great
- Josh
Boosted, Bagged, Stretched, Pulled, and Fitted
The Golden Build > Thread
-
Senior Member
Four Rings
^^^^ u should wrap the shift surround and ashtray
Mod list too long see my build page here
b6 s4 stuff for sale :] here
-
Senior Member
Four Rings
prosport mechanical boost gauge:
I can control the brightness by pressing the + and - buttons below the coolant gauge (i spliced the power wire of the gauge into the wire for the headlight control)
lower brightness:
highest brightness:
-Eric...the RED. 
-
Account Terminated
Four Rings
 Originally Posted by PDX04a4
prosport mechanical boost gauge:
I can control the brightness by pressing the + and - buttons below the coolant gauge (i spliced the power wire of the gauge into the wire for the headlight control)
lower brightness:
highest brightness:

i like the gauge but i think that belongs in a VW
-
Stage 3 Forum Advertiser
Four Rings
 Originally Posted by PDX04a4
prosport mechanical boost gauge:
I can control the brightness by pressing the + and - buttons below the coolant gauge (i spliced the power wire of the gauge into the wire for the headlight control)
lower brightness:
highest brightness:

I like the offset to the left. Ever consider changing the bulb to a red one to match the dash?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks