I would like to begin in saying the we are now a Full Advertiser here on Audizine and we greatly look forward to serving the Audi Community here on Audizine
We have decided to create a thread that we will continually maintain and up-date with what we here at RSW call "Shop Life". It will portray the day-to-day customer work, projects, events and anything else we find worthy of the Audizine Community.
Some pictures from recent work we have had in the shop...
On this FSI engine the owner is running a Upgraded Turbo system that utilizes a GT3071 Turbocharger. In his quest to make more power and go faster, RSW is currrently upgrading the Stock OEM engine Internals with Forged Rods, custom JE pistons, and ARP's newly released Head Studs for some extra clamping force. Were hoping that he will really be able to lay down both good power and some solid track times.
Now on with some pictures :laugh:
Pistons are out ! We are about to start filing the new rings to get the new JE Pistons into the engine.
The white MKV GTI we Installed a nice set of FK coilovers on the previous day, had her inside tucked in for the night :P
Been installing quite a few APR HPFP, and all I can say is what a beautiful product.
Can't beat a timely install, and a quick re-flash and seeing a customers eye's light up as they rip down the street in front of the shop!
Had a customer's car in the shop the other day and this was on the windshield... DAAAMMMMNNN
Had this B7 in the shop for an estimate on a APR stage 3 and a little special sauce engine build...
A set of Custom Spec JE Forged Pistons and Brute rods ready for installation...
Finally for today some headers ready to go into one of our customer's porsches
Had a beautiful 2006 Porsche Cayman S in the shop for a few days. Installed entire new APR Exhaust System which included Headers, Cat deletes, and new mufflers. We also flashed a Fully Loaded ECMS upgrade. The owners was amazed with the quality of the upgraded power and the sound of the exhaust !
mmmm 20's fit pretty nice on this unit
Can't beat the $15,000 Carbon Ceramic Brake Upgrade!
OEM exhaust system out, looks pretty good for only 11,000 miles on it.
The new Sexy-ness
Did some diagnosis on an older E Class Benz
Installed a few sets of coilovers this week
Completely Rebuilt the entire Suspension on this Mark 4. Coils, sways, wheel bearings / hubs, control arm bushings. She rides tight like prom night !
Late night last night working on our new employees Evo. His Triple Disc Clutch setup was starting to fall apart, I guess 700AWHP will do that
Since we broke our Trans jack and are still waiting for the new one to come we put Shrek (JR) to work !
We got our new Miller TIG machine all setup with our Water-Cooler....
:laugh:
02Q pulled apart for inspection... Everything looked to be in order, just waiting on the Differential to show up. Hopefully the Quaife works well
:)
Now on with a few pictures
Fully powder coated FSI Engine Bay....
:laugh:
On another note, we are now an AUTHORIZED Aquamist Distributor. Had a nice conversation with Richard @ Aquamist UK this week and we will now be able to offer their full line of Alcohol Injection systems. The Aquamist system by far surpasses all of the Alcohol kits currently on the market !
Oh boy...what do we have here !?!?!
BSH 2.0T FSI Turbo kit with Unitronic Tune.
Its going in this vehicle...
We are also building the engine, installing a set of upgraded Rods, installing a Peloquin with a South Bend Stage 4 Clutch System with a Solid Un-Sprung Clutch Disc.
[b] Here are a few pictures of the '07 FSI GTI we just did a Full APR Stage 3 on with Fuel Pump and Intercooler !
The Heart of APR's Turbo System: Everyone Meet the Garrett GT2871 !
OEM FSI Turbo vs. APR Turbo System
The GTI's new FMIC ... No cutting involved, she just slips right in !
We did a custom cat delete section for the customer, he can now swap the cat in and out of the exhaust with ease via the v-banded section !
The Turbo Installed, fits rather nicely, don't you wish they came this way from the factory
We did a full ECU Upgrade on this B6 S4, and installed a Intake for the customer about a week ago, man that v8 really sounded much better with just the intake system on it !
In our quest to run better times at the track with our GTi we decided that we were going to replace the flimsy rubber control arm mounts with these solid much more beefy rebuildable bearings! The car really hooks up with these. We are going to offer an Installation Special on them once we give them our seal of approval ! They really tighten the front end of the vehicle up, give you a bit more road feel. I think JR wants to replace all the OEM Stock Suspension Bushings all around the vehicle soon.
Here are a few pics from over the weekend when we were tearing apart the A3 we have in the shop to build the engine / trans / install the new turbo system...
We had this '97 993 S in the shop the other day, had to perform some diagnostic work on it, and unfortunately for the owner things aren't looking good!
Rebuilt Transfer case from a Mercedes E320 !
We are now stocking Motul GearBox Fluid it ! Life Blood for your Transmission !
Who likes HUGE OEM Brakes, there going on a Mark 5, everything is out at the powder coater now !
Some Pics from Transmission Rebuild Week ! We had a couple in the shop :D
One of the 02Q's got a nice Peloquin Differential Unit
Measuring for carrier bearing shim thickness
Differential Shimmed and Installed !
This trans needed completely new 1st and 2nd gear assemblies. All associated Parts for the rebuild
New 1st and 2nd Gears
Gear stack diss-assembled ready for the new gears / syncros to be installed !
A set of 3 piece 19x9.5 and 18x8 wheels that were just done for a customers NSX. The lips are colored matched to the vehicle. The NSX will be in the shop for some repair work early this coming week, we can't wait to see what the wheels look like on the car...
Set of OEM BIG BRAKES for a customers Mark 5, should complement the APR Stage 3 we recently installed on his vehicle !
Looks like a new turbo for one of the shop cars ! Should have her running again tonight, will be nice to see how she feels with a freshly re-built transmission!
RS4 we had in the shop right before Christmas, Wife brought it in to have an APR ECU upgrade installed as a Christmas present for her husband
Who likes bigger crank pulleys for Blown Mercedes !
Had this VR ripped apart for a heater core last week, it may just end up with an HTA 35R on it as well
Have some exciting things coming up for you guys ... who likes v10 Audi's and Mark 6 GTI Stage 3s !
Now on to something a bit more exciting, we currently have a GLI in the shop receiving a Full APR S3 ED 30 Turbo Kit along with a Wave Track Differential
Valves don't look too bad, we have seen ALOT worse....
Stock K03 vs S3 Turbo
The Wave Track Install, we have never installed one of these LSD's from AutoTech so we are excited to see how it performs
Much Appreciated Anthony ! We will be regularly updating the thread with new and exciting things going on in the shop for all the community to check out !
.: Redline Speed Worx :.908.223.7477 Tri-State'sPremier APR Installation Center German Automotive Repair, Performance & Fabrication
Nice Craig ! Did you get the upgraded TB ? I'm installing one on another E55 next week I believe, we are also putting some nitrous in for the owner !
Waiting on JR for that, I want to do it big with a 90MM... only thing is i've heard of people having idling issues from my due diligence on this upgrade. I believe i have the 172MM Crank pulley coming to me... invoice says 180MM so if it's 180MM i'll have a little more power with a lot more heat soak! I have the supersprint headers on the way, and the HE/Pump. Let me know how the TB goes. What else can we fab up at the shop??
Black B6 A4 3.0 QMT6 (RIP)
Black C5 S6 Avant
Black W211 E55 AMG
Yes we have been in the car business for many years now, and I can honestly say I love nothing more than coming to work everyday !
We have just solidified our relationship with the guys at PES, and are looking for RS4 / S4 / S5 / R8 owners that are potentially interested in the PES G4 Supercharger System !
For all interested Parties will be be able to offer you amazing pricing on the system itself including installation at our now PES Authorized RS4 / S4 / S5 / R8 Installation Center.
.: Redline Speed Worx :.908.223.7477 Tri-State'sPremier APR Installation Center German Automotive Repair, Performance & Fabrication
WOW you guy do amazing work !! and its really great how you present it..... Im gonna be looking to do work on my s4 ;) chip intake exhaust at once within i would i say 3 month... cant wait!
2010 Phantom Black S4, 6MT, NAV w/Cam, Bang & Olufsen, Sports Rear Diff, Carbon Fiber....
**Stratmosphere Intake-SOLD..APR intake & tune NEXT , V1 Hardwired w/ LI Dual Heads, 35% Tint**
RSW hooked my car up with some internal work and stage 3 kit from apr one week ago. Nothing but good things to say about my experience. Pat, JR and rest of guys will take care of your needs. Car drives like a dream.
Welcome aboard, looks like amazing work. I need a few things done to my b7a4, need to fix my pcv thinking BSH stage 2, oil change, check cam follower and coil packs. Pm me with pricing and estimated time on fix.
Should get some updated pics up today from the past few days ! Glad to see everyone is enjoying our thread of our day to day operations here in the shop !
So it looks like we will be getting 1-1.5 Feet of snow here tonight / tomorrow, depending on the severity of the weather we may be closed tomorrow ! But I will have internet access, so for any emergency's feel free to shoot me a PM / E-mail !
.: Redline Speed Worx :.908.223.7477 Tri-State'sPremier APR Installation Center German Automotive Repair, Performance & Fabrication
FSI CARBON BUILD UP from a vehicle with under 60k and Upgraded Turbo System, this cylinder head showed "Mild" Build up compared to other vehicles we have serviced
Un-Cleaned Valves Removed from Cylinder Head
Sea Foam Cleaning on Two Valves while they were still in the Cylinder Head VS. Un-cleaned
These Two Valves were Sea Foamed while still in the head, as you can see its still difficult to clean the back sides
Sea Foam Clean Ports while head was still fully assembled VS. Un Cleaned Ports
As you can see from the pictures a Sea Foam Treatment Service to clean the cylinder head / valves only works to an extent ! Cylinder head is currently being steam cleaned, all the valves will be fully cleaned and re installed with new Valve Guide Seals.
.: Redline Speed Worx :.908.223.7477 Tri-State'sPremier APR Installation Center German Automotive Repair, Performance & Fabrication
you guys don't remove the whole engine when doing rods and pistons in the FSI's?
No we do not, There is no need to unless you are going with a Oversized Piston and or there is damage that needs to be reparied by a Machine shop
[AMESSA4_NJ
nice work . ill keep u guys in mind.
Thanks! Let us know if there is anything you need..
1_clean_Audi
u guys doo some awsome work!!!!!!!!!!!
question can you guys get suspension?
also i have a bent rim and another rim that a chunk came of it,do you guys fix stuff liek that besides powdercoating wheels.?
Luis
Yes we can get many different brands! We do not recommend repairing bent wheels becuase they will actually crack overtime from reforming the aluminum. Email or PM us for more details..
Reply With Quote
Originally Posted by PAT@RSW
Bookmarks