Official: FCP Groton Control Arm Kit

[FCPGroton]

Option 1: (SEE PICTURE BELOW)
13 Piece Control Arm Kit Contains:
4 Lower Control Arms
4 Upper S4 Upgrade Control Arms
2 Tie Rod Ends (Rubber Dampening Shaft)
2 Updated Sway Bar Links
Hardware Kit
Audizine Group Buy Cost $194.95 (Shipped Free to US Lower 48)



Option 2: (SEE PICTURE BELOW)
13 Piece Control Arm Kit Contains:
4 Lower Control Arms
4 Upper S4 Upgrade Control Arms
2 Complete Tie Rod Assemblies (Rubber Dampening Shaft)
2 Updated Sway Bar Links
Hardware Kit
Audizine Group Buy Cost $224.95 (Shipped Free to US Lower 48)



Option 3: (SEE PICTURE BELOW)
13 Piece Control Arm Kit Contains:
4 Lower Control Arms
4 Upper S4 Upgrade Control Arms
2 Complete Tie Rod Assemblies (Updated Full Metal Version)
2 Updated Sway Bar Links
Hardware Kit
Audizine Group Buy Cost $239.95 (Shipped Free to US Lower 48)




Shipping to Canada flat rate of $50.00 via USPS Priority International (Taxes and duties would need to be paid by you upon arrival)

To purchase: send paypal to sales@fcpgroton.com with your Audizine user ID,Vehicle, Vin, Option # you would like to purchase, and obviously the correct amount OR call Joe Coppola directly at 877-634-0063 ext 221

Let me know if you have any questions.

[S4 Big Head]

You have a PM

Excited about this

[FCPGroton]

Question: Which option is Aluminum or Steel?

Answer: Just pick an option and give us your make model and Vin and we will put the appropriate lower arms in the kit!

[BlkdoutS4]

sweet, i'll be placing an order shortly.

how long will this group buy be going for?

[stapo69]

PM sent. Very interested.

[headshok2002]

Am in on this for sure, too. Will email or call soon.

[shadwarr1]

WOOT! Glad to finally see this. Will be ordering soon.

Question: Am I going to get more road noise/vibration by going with option #3 with the full metal tierods vs. #2 with the rubber dampening ones?

This is my daily driver, but I'm not hyper sensitive. Just curious.

[FCPGroton]

Am I going to get more road noise/vibration by going with option #3 with the full metal tierods vs. #2 with the rubber dampening ones?

No, you will not notice any difference in road noise or vibration

[CONTROL ONE]

Ok, so if I'm understanding this correctly, the only difference between the 3 options are in the Tie Rods.

1. Partial replacement
2. Full replacement
3. Full replacement and metal

Is the correct? Would you recommend #2 over #3?

Also, could you give me some info on the motor mounts you carry? Are they OEM standard, better/stiffer than OEM?

Thanks, can't wait to make the order.

[FCPGroton]

Ok, so if I'm understanding this correctly, the only difference between the 3 options are in the Tie Rods.

1. Partial replacement
2. Full replacement
3. Full replacement and metal

Is the correct? Would you recommend #2 over #3?

Also, could you give me some info on the motor mounts you carry? Are they OEM standard, better/stiffer than OEM?

Thanks, can't wait to make the order.

Yes, that is essentially the different between the three kits. You really can't go wrong with either 2 or 3. You will not notice any difference in road vibration or steering sensitivity. Check out this tech sheet explaining the difference between OE and Full Metal. http://images.imcparts.net/shared/do...W_06.03_en.pdf


What is your year make and model for the engine mounts? We deal with over 30 suppliers in and outside of the United states and have access to nearly every Audi/VW replacement part (we can even quote you dealer items) - so I will provide you with a bunch of brands and options.

[nnnick]

just to confirm, this is for b5 only, correct? Anything for b7?

[greensto]

Is this similar to Stern's adjustable front control arm? (even though I have a b7 as well)

[FCPGroton]

just to confirm, this is for b5 only, correct? Anything for b7?

I believe the only difference between the B5 and the B7 kits are the front lower (straight) control arms <--correct me if I am wrong

B5 chassis takes either 4d0407151p or 4b3407151c front lower control arms (depending on steel or aluminum uprights)

B7 chassis takes 8e0407151M front lower control arms

So, if you are looking for a B7 kit, just add $40 to the price of the three options.
Please, just double check with me by giving me your make model and year so I can verify the pieces

[FCPGroton]

Is this similar to Stern's adjustable front control arm? (even though I have a b7 as well)

No, these are stock replacements (actually an upgrade for some A4 and S4 models) and they are not adjustable. Stern has a phenomenal product but a huge price tag.

[stapo69]

Paid!

[CONTROL ONE]

Yes, that is essentially the different between the three kits. You really can't go wrong with either 2 or 3. You will not notice any difference in road vibration or steering sensitivity. Check out this tech sheet explaining the difference between OE and Full Metal. http://images.imcparts.net/shared/do...W_06.03_en.pdf


What is your year make and model for the engine mounts? We deal with over 30 suppliers in and outside of the United states and have access to nearly every Audi/VW replacement part (we can even quote you dealer items) - so I will provide you with a bunch of brands and options.

Thanks for the clarification. I meant to say do you recommend #2 over #1 as in is the full replacement easier to install than the partial?

I have a 2000 Audi S4, 6spd as far as the motor mounts go. I'd be happy with a marginal performance upgrade over OEM.

Thanks.

[jeproks]

I will be installing these myself and I'm wondering if I need to add 10% from the purchase price to "buy" the lifetime warranty? Do I have to email warranty@fcpgroton.com or do I just automatically add it from the paypal or maybe you throw in the lifetime warranty for GB purchasers?

[FCPGroton]

I will be installing these myself and I'm wondering if I need to add 10% from the purchase price to "buy" the lifetime warranty? Do I have to email warranty@fcpgroton.com or do I just automatically add it from the paypal or maybe you throw in the lifetime warranty for GB purchasers?

Once you have finished completing your purchase, simply email warranty@fcpgroton.com with a lifetime warranty request and they will lead you through the steps. Unfortunatley because we are giving away the control arm kits at such a low price, I can't throw in the lifetime warranty for free (however all kits come standard with a 1 year warranty).

Regards,

[FCPGroton]

Thanks for the clarification. I meant to say do you recommend #2 over #1 as in is the full replacement easier to install than the partial?

I have a 2000 Audi S4, 6spd as far as the motor mounts go. I'd be happy with a marginal performance upgrade over OEM.

Thanks.

Either one will be fine. Both are a fairly easy install, so there will be no benefit (as far as ease of install) to go with one over the other)

2000 S4 Engine Mounts:

8D0 199 379 K

Brands Available

FEQ (Chinese) 29.50 each
Febi/Bilstein (Germany?) 37.50 each
Meyle (Turkey/Germany) 45.00 each
GLM Global (No country of origin - but GLM provides great quality) 25.00 each

[Ultra B6]

PM Sent

[BlkdoutS4]

how long will this price be good for?

[FCPGroton]

how long will this price be good for?

Price will be good until you need to buy it , or we run out LOL

[DoGGRoBBer]

I already bought the Upper control arm kit. How much would it be if I just get the rest of the #3 setup?

Thanks
-Mike

[CONTROL ONE]

Either one will be fine. Both are a fairly easy install, so there will be no benefit (as far as ease of install) to go with one over the other)

2000 S4 Engine Mounts:

8D0 199 379 K

Brands Available

FEQ (Chinese) 29.50 each
Febi/Bilstein (Germany?) 37.50 each
Meyle (Turkey/Germany) 45.00 each
GLM Global (No country of origin - but GLM provides great quality) 25.00 each

Excellent, thank you. Any personal recommendation of 1 over the other?

[Splinter]

Awesome group buy, excited to see FCP as an official advertiser now.
What kind of pricing could you guys do for the full metal tie rod ends alone for my 01 S4?

[geeky]

I have these on my B5 A4 (aluminum) version. I love them, but my outer tie rod on my driver side has started to slightly leak. If you can do anything for me about a replacement or something please let me know by pm.

They currently have 7k miles on them.

[CONTROL ONE]

I have these on my B5 A4 (aluminum) version. I love them, but my outer tie rod on my driver side has started to slightly leak. If you can do anything for me about a replacement or something please let me know by pm.

They currently have 7k miles on them.

Would it have made a difference if you had full metal version?

[FCPGroton]

I have these on my B5 A4 (aluminum) version. I love them, but my outer tie rod on my driver side has started to slightly leak. If you can do anything for me about a replacement or something please let me know by pm.

They currently have 7k miles on them.

Can you explain leak? Is it leaking at the boot? Did the boot tear?

[FCPGroton]

I already bought the Upper control arm kit. How much would it be if I just get the rest of the #3 setup?

Thanks
-Mike

Did you buy the uppers from us?

[FCPGroton]

Awesome group buy, excited to see FCP as an official advertiser now.
What kind of pricing could you guys do for the full metal tie rod ends alone for my 01 S4?

30 each (60 for the pair) but I can't sell them individually right now. I only have 12 left and need to save the inventory we have to fill the group buys. I will have some more in stock in a couple weeks.

[mr.awesome]

you should do a sale for the c5 a6 :) im thinking about getting a kit to throw in this spring. my dad put a kit in my mom and sisters a6 and i seriously think this is one of the best deals around

[DoGGRoBBer]

Did you buy the uppers from us?

Sure did!! You guys have the Best prices around....

[chrisbostonusmc]

you should do a sale for the c5 a6 :) im thinking about getting a kit to throw in this spring. my dad put a kit in my mom and sisters a6 and i seriously think this is one of the best deals around

I believe the part numbers are the same? Can you confirm FCP? 2001 A6 2.7T 6speed
heres my vin to check Mike
Vin # WAUED64B91N049126

I know at least some parts in the set are interchangeable

[FCPGroton]

Sure did!! You guys have the Best prices around....

I would deduct the price you paid for the uppers out of the kit that you would like to purchase. You can email me scottd@fcpgroton.com.

[FCPGroton]

I believe the part numbers are the same? Can you confirm FCP? 2001 A6 2.7T 6speed
heres my vin to check Mike
Vin # WAUED64B91N049126

I know at least some parts in the set are interchangeable

Just checked, looks like the parts are all interchangeable indeed.

[FCPGroton]

Would it have made a difference if you had full metal version?

It would not make a difference - the rubber boot tore (thats why it is leaking grease - the actual joints or shaft did not fail or break)

[Mooseimage]

Giggling like a school girl here. Tomorrow I can finally place my order.

[Congratulati0ns]

i just bought these yesterday and paid $300....=[ shoudnt they be $205 or $250 at most? Anything you guys can do to correct that? even store credit would be helpfuil thankyou

[FCPGroton]

i just bought these yesterday and paid $300....=[ shoudnt they be $205 or $250 at most? Anything you guys can do to correct that? even store credit would be helpfuil thankyou

Yep, I'll hook you up and adjust things. Just email me, scottd@fcpgroton.com

[michael66899]

This is awsome, I've already purchased two complete sets from you guys in the past and have always been happy, especially with the customer service. I'll be ordering another package here shortly for my new S4.