AUDI A4 B6 to B7 RS4 Widebody Replica Conversion Build Diary

[ngng]

Thanks. Its taken me just under a year to get to this point

that's quick!

[ngng]

no probs. Quite easy to do. I didn't use the kufatec kit.
I did it manualy one wire at a time. I have it all recorded which wire goes where etc. Pm if you need.
How far you got with yours.

could you post that up? I'd like to get rid of some dipped beam errors I'm getting

[adeelkhan323]

Wired up the rear lights.
and fitted the rs4 rear seats.
part fitted the rs4 dashboard.
ignore the steering wheels, its only temporary.







Click here to see the full project

Click here to see the car

[docurley]

I hate you more and more each day.

Dam she's looking good.

[adeelkhan323]

I hate you more and more each day.

Dam she's looking good.

Thanks.
Time, Patience and a lot of elbow grease.

[adeelkhan323]

Just had a small problem with the central locking. One of the rear doors doesn't open.
When i press unclock, it makes a noise as if it is UNlocking. Then a nother noise like its locking again.
The door card is all of so i can reach all the cables.
I even tried pulling the cables that go to the handles. But nothing.
Help anyone.

[adeelkhan323]

Fitted 20mm spacers on the back.
Perfect hight and offset now.
Still need to fit the heavy front seats which should bring it down a touch more.










Click here to see the full project

Click here to see the car

[adeelkhan323]

Front wheels fitted. However I think i may have lowered it to much.
Any one know how high the front end should be of the ground.





Fitted the front bucket seat and wired all the electrics.
The sides fill with air to fix you in to the seats so you don't slide.


All the centre console fitted.




Click here to see the full project

Click here to see the car

[docurley]

So when you going to hit the road?

[adeelkhan323]

So when you going to hit the road?

Just having some issues with the back windows. The car didn't come with any electric windows in the back so i'm fitting some in.
But i'm using the orignal audi window motors and also the audi switches. I've had to fit some relays in to make it work.

Should have the car on the road in a couple of weeks.

Have you started on yours yet.

[docurley]

nah still collecting parts but in the mean time I have been slowly sorting the engine and am about ready for a custom remap.

[adeelkhan323]

Ready to Roll







Click here to see the full project

Click here to see the car

[adeelkhan323]

Interior

Here's the interior.
Yeah i know its a bit dark.




Click here to see the full project

Click here to see the car

[adeelkhan323]

The car's a bit to low at the moment. So i'm taking the 50mil koni springs
and changing them for the OEM sport option.
Will have some more pics next week.

Then need to do the sub enclosure.

[docurley]

Look dam good

[Operator]

Impressive work!!

[akaEsCo01]

The ride height looks great, I would leave it. Top notch work all around, I am extremely impressed you did it all in your garage, can I borrow you lol.

[UkuRiSh]

Owsome work man .

[Elliott]

Owsome.

[JEENYUS]

ride height looked perfect.