Import Motors Service Inc
5105 Marshall St
Arvada CO 80002
303-422-9654
The two guys who run this shop are terrific, honest and cooperative. They kept my 2000 A4 running great for a decade although they get so busy, sometimes you have to wait for an appointment
Import Motors Service Inc
5105 Marshall St
Arvada CO 80002
303-422-9654
The two guys who run this shop are terrific, honest and cooperative. They kept my 2000 A4 running great for a decade although they get so busy, sometimes you have to wait for an appointment
is this the former RS motorsports or just nearby it?
92 Gti 2.0 16V ABD/Recaro/Racelandy/Techtonics/Ronal
06 AVANT S-line QMT6 / REVO Stg II+ / S4 Mir caps / RS4 Pedals / RS4 Bi-Xenons / Techtonics full exhaust & DP w/ Borla Mufflers / Carbonio CAI / Spacers Fr & Rr / Front Plate Delete / Debadged / Monster Mats / Tint / H&R Sports / RS4 rear sway / lamin-x / VAGcomed out / 034 HFC / VMR Boost Gauge /OEM Rev. 'D' DV / APR HPFP / 640 Mod / BSH PCV Stg II / Devil's Own W/M rocking 3zero3motorsports BOOST FUEL "MEFF" / BBS Style5s
autohaus has done a LOT of work on my car. Not 100% sure if i am remembering correctly, but I think i recommended them to you, andrew?
mark is a boss, they're super nice guys and really honest. ALWAYS talking me out of buying shit i don't need, which is pretty fucking awesome for a shop to do.
but i guess they know i'm a little impulsive
also, autohaus just moved into their new place... its big!!
i know that they're letting another AZ member leave his car on a lift for a whole week while waiting for replacement suspension parts... that's what i call service! maybe he'll chime in b/c i know he likes them too
Anyone in need of a wheel repair, get in contact with Lee from Lee's Wheel Repair & Custom Paint 970-556-3690. I had a deep gouge in one of my brand new wheels (happened within 4 hours of install, I made a foolish mistake.......) and let Lee do the work on it and, now I can't even tell which spoke needed repair. I'm waiting to get my winter wheels back from him (getting powder-coated). Über fair prices!
Just got the car back from SCR Performance yesterday. Those guys always have taken great care of me over the last 9 years. Thanks fellas (and Jennifer)!
I need a shop in the Springs to take a look at a potential buy for me. Anyone have any recommendations? Probably just a quick and dirty check out with a VagCom check to see if it's throwing codes and a once over to make sure that I'm not jumping in to a money pit.
Anyone recently have performance work done at Wolfsburg Autowerks?
Didn't end up going and SCR again wasn't able to get me in, so I gave Autohaus of Boulder a go. Good experience, and legit group of guys it seemed (at least from my short time there).
Double DIN swap, pioneer avh4000, TONS of suede, 15% tint, Forge 007, apr/vdo, rs4 grille, GIAC chip, Depo ecodes with 55w 5000k HID's, ST Coilovers, 034 street density motor and trans mounts, 034 snub w/ bracket, 034 aluminum subframe bushings, valeo single mass cluth/flywheel setup, new control arms and axles, evo ms CAI, powderoated snazzy stuff, euro trunk, multi colors, Shaved exhaust cuttout with hidden turn down tips (in progress... again)
Can anyone give me a good ballpark time to do a complete front control arm swap? I have a mechanic who will do it for me, I am just looking to make sure the price is fair in terms of labor hours.
weird I stopped in there and was talking with hank this past tuesday
what time? i work afternoons after school. u wouldnt have seen the audi tho, its currently broken down and im driving my bros lifted blue cherokee. whatd u come in for?
Double DIN swap, pioneer avh4000, TONS of suede, 15% tint, Forge 007, apr/vdo, rs4 grille, GIAC chip, Depo ecodes with 55w 5000k HID's, ST Coilovers, 034 street density motor and trans mounts, 034 snub w/ bracket, 034 aluminum subframe bushings, valeo single mass cluth/flywheel setup, new control arms and axles, evo ms CAI, powderoated snazzy stuff, euro trunk, multi colors, Shaved exhaust cuttout with hidden turn down tips (in progress... again)
I highly recommend Autosport Werks, when I had to come down to denver in search of a turbo intake pipe, they came through like champs!!! I also urge anyone thinking apr chip tuning locally to not go that route. In order to repair a bad chipped ecu you are pretty much hosed, and need three ecus, so you can send in the bad one to apr with a good one, and one to install while you still need your car. Eff you apr, thanks for my wallet being 500 lighter, and a nice paper weight for an ecu. Work on your customer service and figure out how to have your dealers repair ecu's or at least do a swap good for bad.. No offense to RS Motorsports, but I am totally not satisfied. I wasn't even chipped a year. I am a mechanic myself and this type of customer service is unheard of in my industry. Sorry to rant.
97 1.8TQ APR reflash, fmic, test-pipe, magnaflow, hyperboost d/v..k03-s...... 168k and counting....
turbo rebuilding... pm for details..
He does mobile work and came to my house and did a great job of removing tint off my wife's 07 CRV and putting new tint on. He was very professional and was very careful working; also he is a nice guy.
FOR SALE
If you know how to get a DTM Front Bumper Cheap, please PM me
Been going to Modern Specialists for over 2 years. Great guys. They specialize in European cars. I think I remember seeing a mint looking 300SL in their garage once.
Modern Specialists Inc
2940 Valmont Rd
Boulder, CO 80301
(303) 443-1540
Bookmarks