Racetec FMICs! - Yet another holiday special @ Autobahn Exotics

[AE Performance]

We are currently offering a special on Racetec FMICs.

From Ractec-

The RaceTec Gen III intercooler is the Ultimate in intercooler for quality, performance, and fitment. Here at RaceTec we have tried several configurations and have conducted extensive back to back dyno testing to select the proper flow rates, dimensions and cooling capacity.

Kit Includes the highest quality parts:

* Bar/Plate intercooler with polished cast aluminum end tanks.
* Powder coated mounting bracket.
* Stainless Steel T-bolt clamps
* High quality automotive silicone
* Scotch Brite mandrel bent aluminum tubes
* Bar/Plate intercooler with 16 Charge rows for ultimate cooling efficiency, thermal reserves and flow rate.
* Cast Aluminum end tanks for smooth airflow and even air distribution.
* Designed to fit the OEM front bumper without any cutting.
* Does not require the removal of the secondary air pump and does not require cutting of the cross over pipe.
* Retains OEM foglights
* Intercooler sits as low as possible to maximize cooling capacity.
* Accommodate lower front facias such as the S4 bumper or aftermarket such as ABT, Kerscher, etc... without creating a gap in space.

For More Pictures and Information on Racetec Products, Please visit- http://www.racetec-us.com/

Racetec B5 FMIC-


Racetec B6 FMIC-


Payment Information
Due to our move at the moment into a new facility, We will have a limited ability to take orders by phone. Please use the following Paypal Links to place your order and it will be shipped ASAP. For the quickest response during this time, please email us @ info@autobahnexotics.com

B5 A4 FMIC - $799 (Please note the year of your vehicle on the form as there are are 2 different piping kits for Drive by Wire, and Non-Drive by wire B5s.)


B6 A4 FMIC - $820


B7 A4 FMIC - $840

[Tony@AE Performance]

Sick deal!

If I had some cash right now, I'd totally do this. Jump on this deal guys!

[LAS]

have pix of the b7 kit, on and off the car?

tia.

[AE Performance]

have pix of the b7 kit, on and off the car?

tia.

I will try to get one of it off the car from Racetec Tomorrow.

In the meantime, here is a picture of it on Peter's car-

[97a41.8t]

AWESOME deal! Should have waited but spent an extra hundred on it elsewhere. Here is a pic of it on my B5

[Solaris]

Here's mine. If you put 2 small holes in the valance, it'll fit over the nubs on the bottom of the IC better so it isn't pushed down. I don't have a pic of it with the holes yet.

[AE Performance]

Lookin good fellas!

[Revolution02]

Looks like the FMIC for the b5 stock bumper is pushing the front lower down a bit. Will the belly pan still fit? And will I be able to keep my fog lights?

[andresito360]

^ x2

[AE Performance]

According to Racetec, you will not lose your foglights, and the belly pan still fits. It is important to make sure the intercooler and bracketry is installed and aligned properly for the best possible fit.

-Nick

[jayuuey]

can you please provide some performance specs such as cooling logs, pressure tests, or dyno? preferably for a B7.

i am very interested but would like more information before i buy.

thanks.

[AE Performance]

can you please provide some performance specs such as cooling logs, pressure tests, or dyno? preferably for a B7.

i am very interested but would like more information before i buy.

thanks.

No problem.

Here is a log of the stock SMIC compared to the Racetec FMIC with a GT2871R Turbo.

[starfriend]

how long will this go for?

thanks in advance :)

[20A4Audi1.8t01]

id like to know as well

tia!

[AE Performance]

This will be going on until the end of the year, or until they completely sell out.

[B7!]

ordered an FMIC from Nick last thursday for my B7 and it arrived in australia today by FedEx!!! very quick customer service and very helpful!!

[20A4Audi1.8t01]

i think ill be ordering before the end of the year

[KraftwerkB6]

Any chance on just selling the core?

[onewicked]

Anything for a C5 A6?

[fred2ka4]

Is this special still available? Can you email me your contact information as I have a few questions?

Thanks, Fred

[AE Performance]

Any chance on just selling the core?

I'm checking on this for you now...

[AE Performance]

Anything for a C5 A6?

The S4 FMIC should work on your 2.7TT. Shoot me an email @ info@autobahnexotics.com if you'd like some more info on it.

Thanks!

Nick

[AE Performance]

Is this special still available? Can you email me your contact information as I have a few questions?

Thanks, Fred

It is, I shot you an email with some more info on your question.

[AE Performance]

Any chance on just selling the core?

Sent you a PM with some info.

[AE Performance]

I'd like to also add that we can sell just the FMIC Core and mounting bracket for those that were interested in only the core. We can offer these @ $425 (Reg. $500).

-Nick

[20A4Audi1.8t01]

still have plenty left?

if all goes well ill be picking one of these up next fri!

[doublezero30]

is it possible to buy just the piping? got in an accident this morning and the core is fine, but the piping is all pinched. thanks.

[eclimax13]

how do these work with k03's?...im going to be stage 1+ and im prob not going to the k04....is it even worth it?..

[doublezero30]

how do these work with k03's?...im going to be stage 1+ and im prob not going to the k04....is it even worth it?..

yes. i mean, for us it doesnt make much difference right now because its cold out. but it will help in the summer. FMICs arnt really turbo dependant as much as they are temerature dependent. the hotter the climate you live in, the better an fmic will be for you. but i liked mine. and it was easy to install as well! just a bit time consuming.

still would like to know if i can buy just the piping though.

[AE Performance]

still have plenty left?

if all goes well ill be picking one of these up next fri!

Still have some left! let me know when youre ready.

[AE Performance]

is it possible to buy just the piping? got in an accident this morning and the core is fine, but the piping is all pinched. thanks.

I will check on that for you and get back to you. Shouldnt be a problem.

Nick

[AE Performance]

how do these work with k03's?...im going to be stage 1+ and im prob not going to the k04....is it even worth it?..

It works great with K03s. I have the Racetec B6 FMIC on my car and I'm GIAC stage 1+ and I noticed a considerable difference with the FMIC. My stock intercooler was always getting heat soaked after only a few minutes of hard driving, and now I dont notice that at all.

[AE Performance]

yes. i mean, for us it doesnt make much difference right now because its cold out. but it will help in the summer. FMICs arnt really turbo dependant as much as they are temerature dependent. the hotter the climate you live in, the better an fmic will be for you. but i liked mine. and it was easy to install as well! just a bit time consuming.

still would like to know if i can buy just the piping though.

Partially true. Cold weather does help, but hard driving, regardless, will heat soak the stock intercooler even in colder weather, it'll just take a little longer. My FMIC and cold weather on my car is an epic experience. Cold weather does wonders for turbo cars.

[doublezero30]

I will check on that for you and get back to you. Shouldnt be a problem.

Nick

thanks man! keep me posted!

[AE Performance]

Have the info for you. Sending a PM.

[ZGSON]

Noob question. Will these fit behind a stock bumper/grill?

[AE Performance]

Noob question. Will these fit behind a stock bumper/grill?

Yes they will. No modifications necessary at all.

[A4Dit]

Is removal of the stock rebar necessary? I have an Oettinger front bumper with the North American rebar that I modified, does this intercooler sit in between the radiator and rebar or does it not come up that high? I have a B6 by the way. If it will fit with my setup I will take one.

[AE Performance]

Is removal of the stock rebar necessary? I have an Oettinger front bumper with the North American rebar that I modified, does this intercooler sit in between the radiator and rebar or does it not come up that high? I have a B6 by the way. If it will fit with my setup I will take one.

You do not have to remove your RE-Bar from the bumper. The FMIC goes in between the AC Condenser and your RE-Bar. here is a picture of how it looks with the bumper off-

[A4Dit]

If I order tonight or tomorrow actually which is Friday, how quick can I expect to see this? UPS ground I'm guessing.