My S4 is back together..

[BING]

After sevareal months and much time spent in the shop the 93' S4 is back togethar with only the FMIC plumbing left to fab..My laundry list of parts include
1. Pauter Machine rods
2. Garrett GT3071R turbo
3. FMIC and plumbing
4. SPEC stage 3 clutch
5. SPEC LWFW
6. New Rings
7. ARP head ,main ,and exhaust studs
8. MOCAL oil cooler
9. Bosch "orange top" injectors(OE Porsche 993 twin turbo)
10. Clevite77 rod bearings
11. KS main bearings
12. 470hp chip and VMAP
13. 7A exhaust cam
14. Swain coated tubular header
15. 3.5" DP
16. Turbosmart dual port BOV
17. New tranny mounts
18. New engine mounts
19. Balanced pistons to 1gram
20. Turbosmart boost controller
21. Turbosmart 48mm wastegate
22. Sport Quattro MAF
23. 034 EFI snubber mount
24. HKS 200mm air filter
25. Bosch 255lph HO fuel pump

[maxh2o]

I'm almost afraid to ask how much all that cost.

[RobT]

Beautiful. That's a dream set up there. Have fun with an amazing car.

Rob

[goody6691]

look at all that room in that engine bay..................so nice and clean too. i hope you get that thing to some shows this year..................good luck with it

[BING]

Yeah,once you remove the air-box you have plenty of room to shift the turbo over and open up the bay.......

[Ado]

wow. awsome job.

[BING]

1. Pauter Machine rods
2. Garrett GT3071R turbo
3. Spearco FMIC and plumbing
4. SPEC stage 3 clutch
5. SPEC LWFW
6. New Rings
7. ARP head ,main ,and exhaust studs
8. MOCAL oil cooler
9. Bosch "orange top" injectors(OE Porsche 993 twin turbo)
10. Clevite77 rod bearings
11. KS main bearings
12. 470hp chip and VMAP
13. 7A exhaust cam
14. Custom Swain coated tubular header
15. Custom 3.5" DP
16. Tial BOV
17. New tranny mounts
18. New engine mounts
19. Balanced pistons to within .5 gram
20. Turbosmart boost controller
21. Turbosmart 48mm wastegate
22. Sport Quattro MAF
23. 034 EFI snubber mount
24. HKS 200mm air filter
25. Bosch 255lph HO fuel pump
26. Alcon Type B Brakes
27. Billzcat Short shifter
28. 2Bennett adjustable Coil-overs
29. Stromung 3" exhaust catless( cat center in garage)
30. VEMS stand-alone management awaiting install(every bell and whistle)
31. 92 S4 rear sway bar(here but not in)
32. V8 rear diff (here but not in)
33. 034 H/O DIS coils
34. eurospec adjustable FPR

This is what i did all complete......[/IMG]

[deephouse]

BING > hey man, stop talkin and go out there and start spanking some M3s and 335s

hehehehe


=) VERY nice project man, respect.

[BING]

Next FMIC i do will be a cleaner job, under the gun and had to get done in a hurry!!

[deephouse]

BING - man i tried to register for TDIF, and everytime time i try to post it says "BOT post detected, goodbye"... then erases my account.

Are you the forum Admin?? what should i do? I tried firefox and IE, so i must be doing something else wrong.

Would like to get registered for that site, looks like a lot of good info there.....

Brian

[gietl]

Next FMIC i do will be a cleaner job, under the gun and had to get done in a hurry!!

Looks good, now you just need to get some sort of grille there in front of that FMIC. You should still get enough air flow, and at least reduce the "look at me!" factor a little.

I have an Apikol, but you can't tell. :) Then again my UrS is not the monster yours has become.

[BING]

I have 2 sets of lower grills in my garage, the problem is my duct work lies where my grills should ! As you know, 2 objects can't occupy the same space at the same time!!

[BING]

BING - man i tried to register for TDIF, and everytime time i try to post it says "BOT post detected, goodbye"... then erases my account.

Are you the forum Admin?? what should i do? I tried firefox and IE, so i must be doing something else wrong.

Would like to get registered for that site, looks like a lot of good info there.....

Brian

PM Sent.....

[gietl]

I head ya, mine are pretty jacked up to. I guess in the picture it looked like you had room, but head on shots can be deceiving.

[deephouse]

Gietl - Which headlights are those? the Genuine European Hellas or the Ebay Hella Inexpensives?

Love the pearl white man...

[gietl]

They are stock lights with Hella Euro lenses.

Thanks for the compliment. It's funny when I started shopping a few years ago the two colors I did not want were the Emerald Green and a the Pearl White. There was just something about the way this car looked with the PW that I fell in love with.

Oh and that's my bastard child B6 Passat 2.0T in the background of that picture.

[deephouse]

BING - do you still have your stock plastic fuel rail cover?

GIEL - did you blackout your grill or is that some Euro version i dont know about?

Brian

[deephouse]

Are we the only UrS4 owners here? LOL...

[BING]

Are we the only UrS4 owners here? LOL...

mine is cracked in the same place...

[biketsai]

nice s4's

[BING]

nice s4's

Thank You !! we try .....

[UrMarvin]

There are other Urs4 Owners trawling the forums...... I recently joined the family with a peal 93. I recognize your names from the s-list as well. so what we have here is three pearls and red?

Nice build there BTW BING. I hope it spends some time at a track.

[URSquattro]

I have one!! haha Hey BING I think every urs4 owner dreams of doing what you have done....good job. Ur-love

[BING]

Nice build there BTW BING. I hope it spends some time at a track.

I must install my RSB, and add an aquamist system before track days....

[urS4]

I must install my RSB, and add an aquamist system before track days....

Mr. Bing

To do your car justice, you must have an HRSB. The stock 17mm bar is only good for 33 lbs of anti-roll. The 26mm HRSB is good for 125, 140 or 155 lbs. It is a manly setup.



Hap, da H of HRSB, Maguire

[BING]

I am in the middle of moving to Charleston,SC . When situated i will contact you for the HRSB to replace the one i have along with the heim joints and i think i need something else from you to make it work.I have everything off a 92 S4 already waiting to go on.My buddy Jesper installed your HRSB on his 95.5 S6 Avant he bought from Bob Pastore and it handles amazing with that on there..

[Side-Step]

Damn! You have one badass car. We need to go out and see what kind of trouble we can churn up. Sent you a PM, but the wife's audi is up and running.
Man, that car is straight up awesome. My friend Josh is going to go nutz over it. He has a '90 coupe that is debating on keeping or selling. I've been tring to get him to keep it and turbo it. Maybe once he see's yours, he'll change his mind.

Mike

[BING]

Yesterday i swapped out my Bosch tri-lectrodes for the Bosch BKR6ES's gapped to .025, I cleaned out my O2 sencor and side-dtep assisted in my Boost/vac gage installation/completion(in but not hooked up).The sputtering issue i had before is all but gone, and today on a nice 4th gear givin it all the beans acceleration i broke the plane of 25psi ,almost 26. More room to play with the turbosmart boost controller but its enough for now...................

[deephouse]

^^ BING, what process are you using to clean the o2 sensor.

Is TDIF down?

[BING]

Pete shut tdif down today,maybe a temporary thing tho. I use MAF cleaner,its not harmful enough to damage O2 sensor......

[BING]

yes it down,Pete shut it down today ........I use MAF cleaner on th O2, not harmful enough to damage ,but still removes gunk......

[BING]

yes it down,Pete shut it down today ........I use MAF cleaner on th O2, not harmful enough to damage ,but still removes gunk......

[Shvltme_90 q]

I was wondering where to find parts for the 20V turbo, i would like to convert my 90Q 20v to an s car. any help?

[urS4]

I was wondering where to find parts for the 20V turbo, i would like to convert my 90Q 20v to an s car. any help?

Check out the link a couple down about helpin a brah out. I've got the engine, tranny and everything else you'd need.

Hap

[BING]

So i'm still having problems with the S4, runs rich,sputters a little under acceleration at 4k rpm,and the 80+% humidity in Charleston SC isnt helping....But i did get a nice 4th gear pull the other day..........

[TheBlizz]

Why did you go with such a small intercooler tho?

[audiness]

BING ... have you made your way to charleston yet?

[BING]

Why did you go with such a small intercooler tho?

What Do You Mean???????

[BING]

BING ... have you made your way to charleston yet?

Got in 1st week of July, left for FLETC 1st week of Aug. and come back on weekends..But looking for a house to buy,will be back in CHS 2nd week november for good....I do pal around with 2 guys i met on here........

[BING]

New updates... Ordered/paid for a 6 speed O1E tranny which will be shipped this week.. Also ordered my VEMS standalone version V3 for the improvements i need tuning wise. If you're not familiar this has the 55 pin connector and uses stock harness and sensors for my stock Motronic P-n-P application.