B6 A4 Ultimate Modification Information Thread. A must read!

[tchristemac]

Great thread, the only thing I need to know some stuff for my B6 A4 cabby???

[ventovr6]

Thanks. Very helpful! I'll help with the USP rear part #'s although I did the DIY on the U.S. rebar so I don't have the part # for that.

USP Rear Upper Bumper Cover: 8E5-807-301-AE-GRU
USP Rear Lower Bumper Cover: 8E5-807-521-G-GRU

**the lower bumper cover comes with the black decal taped to the inside of the cover (masking tape). I don't think it has it's own part#.

Actually, there is the aluminum colored plastic trim piece that goes on the top of the bumper just under the trunk lid. I'll get that and the rebar # soon.

[0330QA4]

Can anyone get the front euro rebar part number for me and a possible price?

[dga4]

where can i buy the fk grill?

[KMHPaladin]

Anyone know where to get Bilstein PSS9's for ~1400 like the original poster lists? I am not seeing them below ~1600.

[actlsub9]

Anyone know where to get Bilstein PSS9's for ~1400 like the original poster lists? I am not seeing them below ~1600.

Yea ill change that, at that time there was a sale going on.

[moustafasou]

Where is the post to remove the lower half of the front bumper? Does the whole bumper have to come off.

I need post for the romovel of the back, side, and front lower halfs. Please help

[seph]

back lower doesn't really come off of the upper, cleanly at least, sides you just remove all of the plastic screws under the car and door weather stripping. front lower come apart from the upper but you will need to take the entire bumper off of the car to get at the tabs.

[18tboost]

Can anybody please tell me where can i get the spliiters for my lower front bumper?? THX!!

[sandspeed]

We might need to revise the OPs or just get a new sticky going. There are some more options out there for certain things, such as 3.0 intakes, Deval body kits, CF hoods and other bits, Rotora 355mm BBK and NEX 355mm front and 330mm rear kits, among other bits. I am willing to help if you want to go through this thread, revise, delete, and update. Let me know,

[nofearhawk]

First time posting, been lurking a long time though. I am the owner of a 04' USP Sedan, and was unfortunately rear ended recently. I know some people look for part numbers for the usp/euro impact bar/rebar, and thought I'd share. (these are the part numbers i got off several estimates)

8E0807313S Impact bar/rebar
8E5807521GGRU lower bumper cover
8E5807301AEGRU upper bumper cover
8E58074433Q7 (estimate says rear bumper cover molding, I suspect it's the aluminum colored plastic trim piece that goes on the top of the bumper just under the trunk lid, since this piece is damaged but not included anywhere else, but not sure on this)
8E0807275C left buffer
8E0807276C right buffer

Hope this helps some of you.

[dummptyhummpty]

First time posting, been lurking a long time though. I am the owner of a 04' USP Sedan, and was unfortunately rear ended recently. I know some people look for part numbers for the usp/euro impact bar/rebar, and thought I'd share. (these are the part numbers i got off several estimates)

Thanks for that info, i'm sure that can help out alot of people!

[KSLine]

Maybe I missed it somewhere. RS4 brake upgrade............

[hihosilver]

OMFG! LOOKS AMAZINGLY FACTORY! One possibly stupid question for you though. How and where can one acquire the USP lip for a fair price? What is a fair price?

[11TUN]

very good this topic .. thanks

[G-Bus]

This may seem like a dumb question, but is there another place to get an USP Lower front other than the dealer? Thanks

[B6Lovin]

This may seem like a dumb question, but is there another place to get an USP Lower front other than the dealer? Thanks

contact Greg@DTH (400HPA4 on here) he can help you out and will set you up with whatever you need

[S4ourplay]

Is there an actual website?

You worked long and hard on that!

[tdmopar59]

this thread is god... i refer to it waaaaaaaaaaaaaayyyyyyy too much lol

[boy412]

Is there an actual website?

For the USP kit?

clicky click

[michaelplummer1]

dude thank you so much this must have taken you along time but for a newbie like me you have no idea how much you have helped me out.

[1BAD4DR]

Awesome thanks!!! + rep

[davkav]

Just maybe to add to the stock brake setups. The 190bhp 1.8T b6 has 312mm Discs up front also.

[vintagespin]

Need to update:

-add Unitronic to the tuners section

- Stasis front BBK part: they don't offer a mono6 380mm front for the b6 a4 anymore, it's a mono4 370mm kit now.


but i guess we're only updating the WIKI now?

[swededA4]

B6 A4 Audizine Informational/DIY Threads

some of the links dont work. i know it is a old thread but man it helps with the searching. thank you in advance

[a4darkness]

Which ones? Might help. ;-]

B6 A4 Audizine Informational/DIY Threads

some of the links dont work. i know it is a old thread but man it helps with the searching. thank you in advance

[swededA4]

Fog Grills Custom
Intake Ram Air Mod
Map Lights Independant
Rear Ambient LED
Water Misting Pump Installation

yeah i guess that would have been important sorry about that.

[PashaS4]

Do the B7 guys have something like this?

[BUSAfREAkA4]

Do the B7 guys have something like this?

i dont think so....i dont think the b7 guys have a search bar either.

[PashaS4]

Ya I looked in the search bar as well. Nothing.

[PashaS4]

Where can I get this?

Rieger

Rieger Front ~$510
-Picture of Rieger Front can be seen HERE
-Made of ABS Plastic
-Is a full front bumper
-Fitment near fenders is a problem seen HERE

Rieger Sides ~$375
-Picture of Rieger Sides can be seen HERE
-Made of ABS Plastic
-Replaces Stock Sides


Its in the very first post, if u need pics.
Also will it fit an S4?

[PashaS4]

Bump