PDA

View Full Version : Schematics Solutions: All necessary info regarding VAG-Com codes and adaptations



German Driver
11-17-2005, 10:30 PM
Schematics Solutions: All necessary info regarding VAG-Com codes and adaptations

Content coming soon!

CO AVANT
02-06-2006, 12:02 PM
Any update on this? Do I need to use vag once I install the RNS-E in my car?

German Driver
02-06-2006, 05:02 PM
Originally posted by CO AVANT
Any update on this? Do I need to use vag once I install the RNS-E in my car?

I'll be posting a bunch of stuff soon but to utilize the DIS proceed with following.

Plug in VAG-Com or ProDiag to OBD port. Open Instrument Cluster. Once in that setting go to Adaptation block. From that point go to channel 62. You will see a code in some cases its 17 or 5 so on. If you have a bicolor DIS change the value to 5 if it is color change it to 21. Turn off the car and upon start up hold the power button on the RNS-E for 15-25 seconds or until unit reboots. It will seem like a long time however contine to hold until unit turns off and speakers make a slight poping noise. Wait 5 seconds and turn the unit back on at this time the DIS should appear. If it doesn't just give the car time to adjust ECU to new settings. Shouldn't take that long however I have seen it appear the next morning in some cars.