Anyone recommend a place for License plate LED's besides USP?

[Teamnct4]

I'm looking at buying license plate LED's and want ones that do t thrown a bulb out warning, does anybody recommend a place to get them besides USP Motorsports?

[Blake P]

I'm looking at buying license plate LED's and want ones that do t thrown a bulb out warning, does anybody recommend a place to get them besides USP Motorsports?

I got mine from PYSpeed.com

[vitchie]

Pyspeed.com is the only place I'll use. The guys here that ordered from other places in the USA all had flickering or blown LEDs eventually.


Sent from my Turbocharged iPhone

[Teamnct4]

Ok I'll order from them. I had a bad experience with USP and wanted to find another place that carried them. Thanks for the info!

[MiracleWhips]

http://www.superbrightleds.com/

Using these (http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fspecs%2Ffestoon_3910-x6.htm#photos) for a whopping $3.70 each.

Best part is you can rotate them in the stock housings to adjust brightness. Ordered in Cool White. No error codes.

[Stubek]

http://www.superbrightleds.com/
Using these (http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fspecs%2Ffestoon_3910-x6.htm#photos) for a whopping $3.70 each.
Best part is you can rotate them in the stock housings to adjust brightness. Ordered in Cool White. No error codes.

Those or blesk festoons from HID Concepts

[OmaHahn]

I used iJDMTOY.com (California company) had them for 4 months now - look awesome and no problems, error-free!!!

[feelgood156]

Those or blesk festoons from HID Concepts

Man! stubek... ordered those festoons--and they threw a code on my avant (in no way am I blaming you, btw) but I like the way they look so I deal w/ it :D

[Stubek]

Man! stubek... ordered those festoons--and they threw a code on my avant (in no way am I blaming you, btw) but I like the way they look so I deal w/ it :D

What year Avant? They are awesome on my 2011, no codes, look great. They were recommended to me by someone on here in this thread.
http://www.audizine.com/forum/showthread.php/414612-LED-License-Plate-Lights-too-Bright-Opinions-Needed?highlight=blesk

Just there you have 4 or 5 people with them.

[feelgood156]

What year Avant? They are awesome on my 2011, no codes, look great. They were recommended to me by someone on here in this thread.
http://www.audizine.com/forum/showthread.php/414612-LED-License-Plate-Lights-too-Bright-Opinions-Needed?highlight=blesk

Just there you have 4 or 5 people with them.


2008, not sure if it's pre .5 or not or if that even matters. I like them a lot, and don't mind the code--maybe one day I'll switch them out but they do for now.

[Stubek]

2008, not sure if it's pre .5 or not or if that even matters. I like them a lot, and don't mind the code--maybe one day I'll switch them out but they do for now.

Since I skipped the B7, I am not 100% sure, but I heard that one of the DIS did give a code and one did not. I can't remember if it is color gives a code and red does not or vice versa. The Hoen housings are probably your answer.

[feelgood156]

Since I skipped the B7, I am not 100% sure, but I heard that one of the DIS did give a code and one did not. I can't remember if it is color gives a code and red does not or vice versa. The Hoen housings are probably your answer.

Yeah, the code's not a big deal, they do look good. They're not very high on the priority list right now :-D thanks for all your help though

[shookatash]

i just installed the superbrightled led's for my license plate and it threw a code on my '11 b8, though looks fantastic.

i also did the puddle lights and it turns out great!

[Stone Soup]

I tried for a b7 a4 for a long time on bulbs and spent more than I planned.
I had tried Pyspeed and the bulb out warning was immediate.

The housing went weeks after and rusted inside.

IJDM at that time had nothing for a B7 even though the website said they did.

They sent a housing for a B6 or B8, who knows.

I went back to regular led's I ordered from tuner domes from before all this.

They threw a code before, hence the whole ordeal

I installed a resistor in the trunk after a hike at a county park and no problems.

It took ten minutes and 2 months later no problems.

[ECS Tuning-Audi]

What vehicle do you need LED license plate bulbs for?

Jason

[Fastlane28]

I tried for a b7 a4 for a long time on bulbs and spent more than I planned.
I had tried Pyspeed and the bulb out warning was immediate.

The housing went weeks after and rusted inside.

IJDM at that time had nothing for a B7 even though the website said they did.

They sent a housing for a B6 or B8, who knows.

I went back to regular led's I ordered from tuner domes from before all this.

They threw a code before, hence the whole ordeal

I installed a resistor in the trunk after a hike at a county park and no problems.

It took ten minutes and 2 months later no problems.

Hey man what type of resistor did you use? I tried a 100ohm 1w resistor on by B7 and it stopped the flickering /pulsing but not the warning light bulb out

thanks,

[Supermanglide]

Pyspeed.com is going to be the only place I'll use. The guys right here that ordered from other areas within united states all experienced flickering or blown LEDs eventually.

[Amsterdamned]

http://www.superbrightleds.com/

Using these (http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fspecs%2Ffestoon_3910-x6.htm#photos) for a whopping $3.70 each.

Best part is you can rotate them in the stock housings to adjust
brightness. Ordered in Cool White. No error codes.

I went this route and have no complaints. On B6 S4 no codes and they look badass. Never flickers.

[JUSADUB]

Ziaa ones got them from ECSTUNING and have been running them for over two year now. No problems at all.

[ECS Tuning-Audi]

We also have the racing dash LED's that come with their own housing. Check them out below.

Click HERE to order or for more information. (http://www.ecstuning.com/Audi-B6_S4--V8/Lighting/LED/License_Plate/ES1899488/?salesrep=JMarusic&utm_source=audizine&utm_medium=forum&utm_content=JMarusic&utm_campaign=postreply)
http://c1552172.r72.cf0.rackcdn.com/79237_x600.jpg (http://www.ecstuning.com/Audi-B6_S4--V8/Lighting/LED/License_Plate/ES1899488/?salesrep=JMarusic&utm_source=audizine&utm_medium=forum&utm_content=JMarusic&utm_campaign=postreply)

Let me know if you have any questions.

Jason

[Emilgevor]

Fastlane you need a 20w resistor not 1w

[3waygeek]

We also have the racing dash LED's that come with their own housing. Check them out below.

Click HERE to order or for more information. (http://www.ecstuning.com/Audi-B6_S4--V8/Lighting/LED/License_Plate/ES1899488/?salesrep=JMarusic&utm_source=audizine&utm_medium=forum&utm_content=JMarusic&utm_campaign=postreply)


Let me know if you have any questions.

Jason

Just tried them out in my A3. Unfortunately, they throw a bulb-out code.

[ECS Tuning-Audi]

Just tried them out in my A3. Unfortunately, they throw a bulb-out code.

Others have mentioned by adding a resistor you can get them to not throw the code.

Or if you don't want to mess with them we do offer a refund.

Jason

[Emilgevor]

Just FYI

B5 - No Errors
B6 - 50/50 No Code (red dash)
B7 - 30/70 No Code

[CLOS323]

Okay guys, I wanted to do this mod on my 2012,A3 but soo many companies throw out the code! Who has a 2009-12 A3 and has succesfully done this with no error codes? And what site did u get them from? Thanks.

[paul-g]

I used iJDMTOY.com (California company) had them for 4 months now - look awesome and no problems, error-free!!!

second these

[marker009]

Anyone know if those RDASH ones will fit a 2005.5 B7 A4? Or maybe where to find a kit that'll fit. I need to replace the whole housing as i stupidly broke the stock one. I have a busted stock one right now and might as well replace it with LED now.

[Anonymous A4]

Audi themselves now do them

LHS - 4H0 943 021
RHS - 4H0 943 022

They are just under 10 pounds each

[marker009]

Audi themselves now do them

LHS - 4H0 943 021
RHS - 4H0 943 022

They are just under 10 pounds each

LED? Orderable through the dealer?

[Anonymous A4]

Yes. They are the part numbers.

[Anonymous A4]

Check this out about them http://www.vwaudiforum.co.uk/forum/showthread.php?t=132774

[marker009]

Check this out about them http://www.vwaudiforum.co.uk/forum/showthread.php?t=132774

Thanks for the info!

[Anonymous A4]

No problemo :)

[jasonwall]

Thanks for the info.It is very useful.

[Anonymous A4]

As an update to the above part numbers being fitted to a B7. They DO bring up a "BULB OUT" warning on the dash. I simply used a resistor and bridged it in place with the LED light to trick the computer. Simples :D