View Full Version : VAG Codes. Need help
06-29-2010, 12:40 PM
both ESP and ABS light on.
01826- Sensor for Steering Angle (G85); Supply Voltage Terminal 30
00778- Steering Angle Sensor (G85)
37-10- Faulty - Intermittent
I am assuming I need a new Steering Angle sensor. or is it something different. Where is this located? anyone have an ETKA or a part number I can see this thing?
Thanks in advance
06-29-2010, 12:52 PM
has anyone done this calibration with any luck?
06-29-2010, 01:00 PM
I had to replace mine in B7 A4 with the same type of code, tried recalibrating and nothing, swapped one from another A4 and that did the trick. This is a clockspring that transfers the airbag connection and steering wheel controls to the steering wheel, you will have to remove airbag with the steering wheel, 10min procedure.
06-29-2010, 02:58 PM
thanks, ironically I just changed the clockspring in my 03 Passat. I was getting an airbag fault with that car. I didnt think I would get this error for a clock spring. do you happen to have a part number?
06-29-2010, 04:54 PM
let me know if you need something else than the clock spring i have an entire b7 chasis to part out, all steering and column still here in jersey ;o)
02-01-2012, 11:47 AM
So I have this same code.... And the general consensus is the replacement of the clock spring fixes it? If any of you guys has on laying around still I'll take it.