DoWerkGarage! Need work done in RI,S.CT or SE.MASS !? Give 'em a call!

[mad70sx]

Gotta put the good word in for the guys at DW Garage,Jake and Ryan,who installed the coilovers and sways. They did a real nice job at a very reasonable price and were very patient with me and all my questions.

How's the hip Jake!? [>_<]

If you need work done in Rhode Island,Eastern Conn. or South Eastern Mass. I would definately recommend them.

Heres a pic of their work.
http://www.audizine.com/forum/picture.php?albumid=1755&pictureid=5993

DoWerkGarage
(401)525-1264
inquiries@dowerktuning.com
www.dowerktuning.com

Thanks again fellas! Will be talking to ya soon! [up][up]

[Jake39454]

Thanks for the shout out Greg! I added your post to the DoWerk thread in the main North East forum, I hope you don't mind...

[Rotond0000]

damn i didint know about this place!!! im so glad i do now... espeically after what happened to yarrowsport...heh yeah...im definately coming to check it out and will definatley be bringing my car around for sure!!!

[itsdarrow]

Thanks for the shout out Greg! I added your post to the DoWerk thread in the main North East forum, I hope you don't mind...

where is your main thread? link?

[Jake39454]

http://audizine.com/forum/showthread.php?t=278548

Not really "official" but seems to be the largest gathering of people satisfied by DoWerk...

[itsdarrow]

i have a question. If i wanted to drop my car off and have you install Rods what price am i looking at, this includes you sourcing the rods.

Oh and the car is a 1.8t b6

[Jake39454]

i have a question. If i wanted to drop my car off and have you install Rods what price am i looking at, this includes you sourcing the rods.

Oh and the car is a 1.8t b6

Am I replacing the timing belt at the same time or am I just getting a tensioner for it? (I don't reuse tensioners) Also am I rebuilding the motor or just dropping in rods? I always strongly suggest AEB pistons and 20mm wristpin rods as well.I really need to know the specs of the build, then I can customize a package around your needs. [cool]

[itsdarrow]

Am I replacing the timing belt at the same time or am I just getting a tensioner for it? (I don't reuse tensioners) Also am I rebuilding the motor or just dropping in rods? I always strongly suggest AEB pistons and 20mm wristpin rods as well.I really need to know the specs of the build, then I can customize a package around your needs. [cool]

im looking to just drop in the rods for peice of mind now that i run meth. I want to run higher timing and boost with my current kit but i do not want to run into the 300+whp range daily with the stock rods waiting to fly out the side of the block at any moment.

I had my timing belt changed 30k ago so im not sure if i should do it again.

Im not really sure the best way to go about this, i just know im really not looking to go balls to the wall maybe upgrading to a full 2871r from my 28rs later down the road.

[AudiA4_20T]

I love those Neuspeed wheels

[Jake39454]

im looking to just drop in the rods for peice of mind now that i run meth. I want to run higher timing and boost with my current kit but i do not want to run into the 300+whp range daily with the stock rods waiting to fly out the side of the block at any moment.

I had my timing belt changed 30k ago so im not sure if i should do it again.

Im not really sure the best way to go about this, i just know im really not looking to go balls to the wall maybe upgrading to a full 2871r from my 28rs later down the road.

PM sent.

[dougyfresh]

DoWerkGarage
(401)525-1264
inquiries@dowerktuning.com
www.dowerktuning.com

Thanks again fellas! Will be talking to ya soon! [up][up]

hahahaha

That's me in the 2nd picture from the left.