Will axis supermeshes fit B6 S4??

[gotsportec]

well???

[foofighter]

might not clear the front brakes

[gotsportec]

thats what i was thinkin ...but u can use spacers correct??

[foofighter]

you can but then you might run into rubbing issues. If it's something like 5mm than that would be ok anything more and you're pushing it. what's the offset on the wheels?

[gotsportec]

35

[foofighter]

5 mm spacer would put you at 30 mm et...that's livable but you have to see if 5 mm would clear the brakes.

[gotsportec]

i guess ill call somebody who sells them

[DGS4]

I tried to put the supermesh's on my S4 and they didnt clear the brakes. I didnt like the idea of spacers and sold the rims.

[gotsportec]

thank u DG

[giago]

I have a offset of 30, and I hate it, lot of rubbing, specially on the back when you are low.
In the front you roll your fender's and you are out of problems!
I'm going to sell them. I hate them

[DGS4]

No problem. I had 19" Supermesh's on my A4, and still had them in hand and thought to give it a try but it didnt work.

Anyways, they didnt hold up to the roads too well. I hit a minor pothole on the freeway one day and it put in a notch deep enough to make the wheels shake. I know you have them, but I wouldn't recommend them.

[400HPA4]

Yup, have 19x8.5 in the front, 19x9.5 in the rear. Never have rubbed, even on the track.
http://home.comcast.net/~fowlergregory/audi.jpg

[gotsportec]

u have an A4.....i said S4

[DGS4]

You beat me to it.

[gotsportec]

yup