Memorial day weekend sale on all JHM "solid" short throw shifters & linkage upgrades

[jaybquick@JHM]

We need to free up some money to R&D more innovative products. So we will be offering 10% off (a savings of $22 to $26 for shifters) of all our products through May 31st. Just use this coupon code when ordering. AZMemorial

Visit our store HERE--> http://shop.jhmotorsports.com


JHM "solid" Short Throw Shifters

http://jhmotorsports.com/products/pictures/JHMsidebysideweb.jpg

Why reuse the stock plastic and rubber pivot assembly which is reused by ALL other short shifters when you can run a JHM (http://jhmotorsports.com) "solid" short throw shifter with a steel bearing with bronze race inside of a billet aluminum base? The feedback and feel is unmatched. Slop and play is also reduced as well. The rest of our shifter is all steel that will outlast any other shifter under every day driving or racing conditions. In addition the bottom steel base weighs more than stock which aids in shifting due to the increased inertia (works similar to a weighted ball). Last but not least we replace the sloppy rubber bushings on the sides of the shifter with solid Delrin units, increasing feedback and feel even further.

TELL ALL SIDE BY SIDE COMPARISON VIDEO HERE---> http://audishifter.com/videos/JHM_Comparison_web768K.wmv


Powershifting video with our shifter at the track! (http://audishifter.com/videos/Jaybquick_11.70_Powershifting_web.wmv)

Videos pics and info on our shifter here --->. http://www.audishifter.com


Reviews from buyers of our shifters
http://www.jhmotorsports.com/testimonials/



Some of the vehicles with our shifter: http://www.jhmotorsports.com/projects/



NOTE: Our reduction is all done at the bottom where the pivot to the rest of the linkage is. It is already adjustable from 5% to 25% (except B5 S4 which is 15% to 35%) based on your preference. If you want a feeling of more reduction and a lower knob height of 1" for more reduction. Just select the option when you order (only $5).

Watch our installation and adjustment videos here---> http://www.jhmotorsports.com/videos/




Visit our store HERE--> http://shop.jhmotorsports.com





Introducing the JHM "Solid" Linkage Upgrade for the B5 and B6 A4/Passat.

http://www.jhmotorsports.com/products/thumb/B5_A4_LinkageComparison_small.JPG

http://www.jhmotorsports.com/products/thumb/B5_A4_LinkageUpgrade_small.JPG

This upgrade is the most bang for your buck to make your B5 and B6 A4/Passat shift with more precision and feel. Save with this 10% off coupon code until May 31st AZMemorial . ! Our test car saw a reduction in slop when shifting by more than 60%. It works with any stock or aftermarket shifter, for best results our shifter is recommended.


View the tell all comparison video to the stock linkage here: http://audishifter.com/videos/JHM_B5A4_linkage_comparisonWeb.wmv


All the details on our site here: http://www.jhmotorsports.com/products/linkage.html

Install instructions here: http://jhmotorsports.com/products/docs/JHM_B5_A4_Linkage_install.doc

R&D FOR OTHER LINKAGE UPGRADES IN THE WORKS!



Visit our store HERE--> http://shop.jhmotorsports.com


P.S. I should be releasing a new inexpensive shift improving product this weekend!

[ungucpho]

can we get the 10% discount when the linkage comes out for the 5 speed B6

[jaybquick@JHM]

Yes sir. I will do a new product release special just for your guys.

[ungucpho]

sweet, thats the piece i'm waiting for.

to those who don't have this short shifter, its one of the best mods you can do.

[AudiSport44]

Ordered!

I opted for the 1 inch shorter rod height and I'm wondering...is that the most you can do?

[1FastS4.Com]

Ordered!

I opted for the 1 inch shorter rod height and I'm wondering...is that the most you can do?


Same here...

[mikeclark111]

Does the 1 inch reduction make it pretty uncomfortable to drive? Or do most prefer the height reduction....



Also, can we get some sort of package deal if we buy the shifter and the linkage at the same time?? :)

[400HPA4]

I just got my solid linkage upgrade and delrin stabilizer bushing...Even though tomorrow is Jason's Birthday, I feel like it is mine today [:D]

[400HPA4]

can we get the 10% discount when the linkage comes out for the 5 speed B6

As of now it is released [up] I got it installed and it is incredible

[AudiSport44]

There is one on the way for the B5 S4s also correct?

[jaybquick@JHM]

Does the 1 inch reduction make it pretty uncomfortable to drive? Or do most prefer the height reduction....

Also, can we get some sort of package deal if we buy the shifter and the linkage at the same time?? :)

Most racers don't prefer the height reduction. I personally don't, I don't like to reach way down to shift. With the lowered height some people do not like that during more agressive driving with the armrest down it is a little more difficult to grab. But it is all preference.




Ordered!

I opted for the 1 inch shorter rod height and I'm wondering...is that the most you can do?

Email me if you want more so I can send one back to my machinist. It may take a week or two since we would have to wait until all the tooling is setup for the next batch of shifters. Can't do more than an inch on B6/B7 A4s and S4s, everything else can be done.




There is one on the way for the B5 S4s also correct?

Yes, I just keep getting sidetracked on R&D. I am on the third prototype. I will be trying to install it in my car when I get a chance. unfortunately the B5 s4 6-speeds are harder to do the linkage on vs the B5/B6 A4 5-speeds.

[AudiSport44]

I just did some measuring and figured I'll be fine with the 1 inch reduction. In that case, how soon could I expect to receive my shifter?

[jaybquick@JHM]

I just did some measuring and figured I'll be fine with the 1 inch reduction. In that case, how soon could I expect to receive my shifter?

Being that I don't stock many shorter ones and I just ran out I will have to send a regular length one back to my machinist to get shortened. Hopefully I can have it shipped out by the end of the week.

Thanks again for the order.

[Gondi Stylez]

Is there no linkage upgrade for B6 6 speeds?

I don't think I'll be able to make this sale but I hope I can get one within the next couple weeks!

[jaybquick@JHM]

A new product released for upgrading shifting on your Audi. HERE--->>> http://www.audizine.com/forum/showthread.php?p=1663464#post1663464

[jaybquick@JHM]

Is there no linkage upgrade for B6 6 speeds?

I don't think I'll be able to make this sale but I hope I can get one within the next couple weeks!

I have been trying to finalize the 6-speed likage for my S4 for a while. It is time consuming to remove the rods on my B5 S4. So once I get it sorted out I will move onto the other 6-speed cars.

[converted2audi]

just placed my order! how long is the expected wait time before the shifters are getting shipped out? I ordered mine with the 1" shorter shaft for a larger throw reduction........

[jaybquick@JHM]

just placed my order! how long is the expected wait time before the shifters are getting shipped out? I ordered mine with the 1" shorter shaft for a larger throw reduction........


I just ran out of the 1" shorter height B6 A4 5 speeds over the weekend. I am trying to get my machinist to make a small batch. Hopefully get it out in a week. I have the regular length in stock and all other shifters are in stock as well.

[Sharpointer]

does your short shifter fit a 6 speed b7 yet? I've ben waiting a long time for you to come out with it, so I was just checking in...

[code7rpd]

Is it too late to get the sale price?

[converted2audi]

I just ran out of the 1" shorter height B6 A4 5 speeds over the weekend. I am trying to get my machinist to make a small batch. Hopefully get it out in a week. I have the regular length in stock and all other shifters are in stock as well.

Any update by any chance? Thanks for keeping me posted......cant wait to get it!

[jaybquick@JHM]

does your short shifter fit a 6 speed b7 yet? I've ben waiting a long time for you to come out with it, so I was just checking in...

It has been available for over 2 months. I have full coverage or all B5, B6 and B7 Audis.

Get yours here --> https://www.shop.jhmotorsports.com/displayProductDocument.hg?productId=8&categoryId=15




Is it too late to get the sale price?

Sale ended on the 31st



Any update by any chance? Thanks for keeping me posted......cant wait to get it!

We started the new batch of short B6 A4 5-speeds yesterday. ALL others are still in stock.