when connecting to terminal 75x

[unknownvirus]

do i just crimp on one of those U connectors to the power wire..and then loosen the bolt....then stick it under there...and tighten the bolt

hope that made sense

plus...this is for a boost guage....can i also double up..and hardwire my radar detector to the same terminal

thanx u guys

[wakko]

basically yea, thats the idea.....pretty straight forward. Not sure about double up, but I dont' see the harm in it.

However, most people will put in an inline fuse since you are wiring directly to the terminals

[unknownvirus]

do i have to put the inline fuse in anyspecific spot?
and will 10 amperes be enuf?

[kjgarreau]

I haven't bothered with a fuse for any of my gauges. Yes, you can double-up on the terminal. I have power running to my gauge lights, and power to my oil pressure and EGT gauges. So I'm tripled-up. What a pain to fit =/

[unknownvirus]

would 75x be a good terminal to wire a radar detector?
will it stay on all the time..or only when the headlights are turned on?

[kjgarreau]

75X is switched, so it will be on all the time once the key is turned.