Audizine

Carbon Fiber SLine Valance

Wed, 22 May 2013 16:49:03 -0500

by: Ruska

Description: Brand new OEM B7 A4 SLine valance that had been wrapped with real carbon fiber. Never used or installed.

034 Motorsports Turbo Inlet Hose

Wed, 22 May 2013 15:14:18 -0500

by: ZORT931

Description: Brand new never used 034 Motorsports Turbo Inlet Hose. Shipping included in price.

Bosch 386cc Audi tt225 Injectors (4) BNIB

Wed, 22 May 2013 14:09:25 -0500

by: a4darkness

Description: Bosch 386cc Audi tt225 Injectors (4) BNIB Audi #: 06A-906-031J Bosch #: 0280155892 lite blue long neck, not grey short neck Throwing in an extra set of o-rings as well: O-Rings (seals) Upper: 035 906 149 A (7.5mm x 3.5mm) Lower: 06A 906 149 A (9.3mm x 2.6mm) I've had these for a while and was planning on going Stage II but decided to hold out for BT. My loss your gain. ;-)

Need a B7 A4 Front Bumper Shock Passenger side

Wed, 22 May 2013 12:21:20 -0500

by: Ladderman22

Description: I need a front Bumper shock on the passenger side for a 07 A4 2.0T I might need a couple more parts too so if you're parting one out send me a pm

B6 A4 Halogen Headlight Housings

Wed, 22 May 2013 08:53:17 -0500

by: blk4est72

Description: Used B6 A4 Halogen headlight housings. All tabs intact, no bulbs. In very good shape, replaced with Euro Housings

Kamei Grille - $60 Shipped

Tue, 21 May 2013 23:08:27 -0500

by: Cgoon009

Description: Grille came off the car to make way for an RS4 grille. It is in great condition, no chips or dents. What you see is what you get. If you are looking to change up the styling of the car, this is a great way to do it. I will include the Audi logo, for no extra charge. The grille is metal, not plastic. Comes with liner for good seal, clips are in good shape.

Test Pipe / Straight piple & full catback stock Exhaust a4 b7

Tue, 21 May 2013 23:04:38 -0500

by: mrjasper3mn

Description: Few items for sale that i don't need. -I have a straight/test pipe for sale. this is a bolt on for A4 B7 2.0t. It is stainless steel and will never rust. it comes with a the metal ring that you see in the pictures. ($60 Plus shipping) -Stock Catalytic converter with about 35k on it. The honey comb seems to be in great shape. The car didn't have any issues with the catalytic converter. It was removed because a straight pipe was put in the car. ($110 Plus shipping) -Also, a full stock exhaust without the downpipes. basically what you see in the picture. The one i am selling is obviously the used stock on and not the brand new stainless one that you see next to it. This system has about 90k on it but had no issues when removed ($100 Plus shipping) Let me know if you have any questions.

Carbonio Air Intake

Tue, 21 May 2013 22:22:17 -0500

by: ImAudi1

Description: has been on the car for about 2 years....in good condition...message me if interested. have all pieces to make item 100% complete.

MASSIVE Facelift partout

Tue, 21 May 2013 21:24:45 -0500

by: GrapeBandit

Description: Everything is off my 2001 a4 1.8t quattro with a manual transmission. Car is brilliant black exterior with onyx interior. [B]everything is OBO[/B] Located in central florida Engine and driveline: shifter box/shift linkage-$150 radiator support-$150 radiator-$100 K&N panel air filter-$25 shipped altenator-$50 AC compressor-$100 AC condenser-$95 rear axles-$45 shipped each manual driveshaft-$130 tranny mounts-$10 each rear differential manual-$150 pedal assembly-$75 shipped crank pulley/engine dampener-$65 shipped P/S pulley-$25 shipped stock airbox-$55 shipped crank/flywheel/engine speed sensor-$25 shipped oil level sensor-$30 shipped axle and trans heat shields-$15 shipped each condensor fan (in front of radiator)-$55 shipped electric fan in core support-$45 shipped cam gear-$15 shipped coolant tank-$20 shipped PS tank-$10 shipped ABS tank-$10 shipped vacuum canister under DS fender-$10 shipped washer fluid tank-$40 shipped bumper squirter pump-$10 shipped windshield squirter pumped-$10 shipped suction pump under DS rear wheel well with filter-$35 shipped charcoal canister box under spare wheel tub-$50 shipped stock 1.8t intercooler-$25 Exterior: hood-$150 bumper-$150 shaved doors-$600 fenders-$75 ea trunk-$150 gas cap-$10 shipped gas cover-$20 shipped fender liners-$35 shipped each fender side marker lights-$15 shipped ecu box upper-$15 shipped cabin air filter assembly 3 piece-$20 shipped wiper blade metal arms-$20 trunk hinges-$25 trunk shocks-$20 hood strut/shock-$20 shipped headlight mounting tabs/brackets (near rad on core support)-$20 front or rear bumper shock-$45 shipped PS cooler loop assembly-$35 shippedSOLD front chassis oem strut bar and side brackets-$75 shipped front hood hinges-$20 rear bumper side mounts-$15 shipped pair front bumper mounts-$25 shipped pair horns-$13 shipped each or $20 shipped pair rear door black shiny metal triangle pieces in doors-$15 shipped pair door strykers, latches-$20 shipped for set of 4 door hinge set-$45 shipped door bear claw latch (mounts in the door)-$25 shipped each wiper motor-$40 wiper linkage-$30 shipped wiper and motor linkage-$65 trunk seal-$10 hood seal on core support or firewall (rubber)-$10 Interior/Electrical: Onyx leatherette seats(COMPLETE: driver&pass fronts, rear back, rear bottom, 2 rear sides, and 4 headrests)-$400 **NOTE: Driver seat bottom does have that patented Audi rip** central locking pump-$75 shipped gauge cluster(106,xxx)missing some pixels-$125 steering column-$125 steering wheel w/airbag-$125 clockspring-$45 shipped wiper/stalk/turn signal unit-$45 shipped dash-$100 facelift center console-CHECK MY OTHER AD shifter surround/shifter boot-CHECK MY OTHER AD facelift center armrest console-CHECK MY OTHER AD e brake- CHECK MY OTHER AD HVAC-$65 blower motor-$50 heater core-$50 fan control unit module-$45 shipped oh **** handles-$20 airbag module-$60 shipped fog light module-$25 complete(F&R) black seat belt set-$70 shipped 6 piece brushed aluminum trim set-$200 shipped Pass side airbag-$40 shipped Side curtain airbags-$40 shipped each interior carpet-$50 seat rail covers(8)-$25 shipped low pair of kick panels black-$30 shipped pair lower dash DS knee bolster-$40 shipped complete glove box-$45 shipped glove box strut-$15 shipped dash vents (sides)-$15 shipped each fuse panel cover DS-$15 shipped fuse panel cover PS-$15 shipped miscelaneous relays-$8 shipped ea aluminum support under dash-$55 shipped airbag module under carpet in front with yellow connector-$13 shipped each CD changer-$50 shipped interior trunk carpeted sides-$15 shipped each or $25 shipped for pair interior trunk floor carpet-$15 picked up or $45 shipped trunk spare tire hold down-$10 shipped rear plastic trunk cover on back of trunk going the width of it-$45 shipped cubby hole side tray in trunk-$13 shipped carpeted side interior light-$7 shipped dead pedal-$13 shipped fuel pump black cover-$7 shipped fuel pump blue in/out cover-$10 shipped fuel fump screw on cover ring-$10 shipped cargo net-$35 shipped hood latch (on rad support)-$35 shippedSOLD hood latch release cable and pull-$20SOLD Suspension/Brakes/Wheels/Tires: abs module-$100 shipped rear uprights with good hubs and bearings-$75 shipped each rear upright with no hub or bearing-$45 shipped each power steering rack with inner and outer tie rod ends-$175 shipped Power steering rack with no outer tie rod ends-$150shipped Front control arm set-$75 shipped rear upper shock hats with arms-$25 shipped each rear upper shock arms-$20 shipped rear lower control arm-$20 shipped each rear subframe-$60 front subframe-$60 front and rear sway bar set with bars, end links, bushings and brackets-$85 shipped rear sway bar set with bar bushings, brackets and end links-$80 shipped rear diff carrier bracket with stock bushings-$25 shipped rear diff mount stock-$25 shipped rear diff mount front mounting bracket-$15 shipped upper triangular hats on front struts-$10 shipped each rear tie rods-$25 shipped pair stock tranny mounts-$12 shipped each brake master cyliner-$30 brake booster-$30 shipped Miscelaneous items: Aeromotive adj. fuel pressure regulator(BNIB)-$160 shipped RC 750cc injectors(BNIB)-$400 shipped RC 1200cc injectors(BNIB)-$400 shipped trickflow fuel filter(BNIB)-$80 shipped MSD coils GM style(BNIB)-$55 shipped each AEM 5.2 bar MAP sensor(BNIB)-$155 shipped Autotech adj. cam gear for 06A(BNIB)-$110 shipped Derale econo-cool oil cooler PN#15830(BNIB)-$135 shipped Denso Iridium ik27(4)-$60 shipped AEB intake manifold-$50

Custom SMIC and Aluminum Throttle Inlet Pipe w/IAT bung

Tue, 21 May 2013 21:16:46 -0500

by: Seerlah

Description: Up for sale is a custom SMIC. It started out it's life as a Boost Factory SMIC plug and play for the B5 A4 that uses a Bell Intercooler core. I then had the outlet cut off, bored, and had a 2.5" outlet welded on. I then had a custom aluminum 2.5" throttle inlet pipe made with a bung for my IAT sensor that went to my in cabin gauge. I was running this on my T3 GT2871R .63 A/R at 21-22psi. But in reality, I would say this has it's limit to maybe a GT2860RS pushed at the same boost (around the 275whp mark). It worked just fine for my setup, but IATs would climb when I would beat the crap out of my car (yes, I enjoy my car). But this was in WOT (multiple gears) with no time for the intercooler to cool off (like 20-"undisclosed" mph). In regular everyday driving (meaning using boost when applicable and not driving like a mad man), it worked flawlessly. I also was running a B5 S4 fender liner with the vents in them. My front grills also has the RS4 mesh mod on them which also allowed for better air flow. Ideally, a custom shroud should have also been made. But I wasn't going to waste my time on that after I invested in a custom FMIC setup. What is included: -SMIC -Throttle Inlet Pipe -2.5" Straight Coupler (goes from SMIC outlet to Throttle Inlet Pipe) -90 degree 2.25" to 2" reducer coupler (goes on stock charge pipe to SMIC inlet) -Aluminum plug for IAT bung -(4) 2.5" t bolt clamps -(1) 2.25" t bolt clamp -(1) worm clamp that would need to be used on the stock charge pipe to SMIC inlet. I was too cheap to order just one 2" t bolt clamp I used a hump coupler hose when running this setup, but I'm keeping that and currently running that on my FMIC setup. I can supply an extra 2.5" straight coupler upon request (no charge), but I would highly suggest you pick up your own 2.5" hump coupler on the throttle body. It allows for ease of installation. I also had this fitted with the IM being spaced out with the 034 Phelonic IM spacer, but that should not be in issue as you just need to adjust for fitment. Any questions, feel free to ask. When all said and done, I want to pocket $500. That means you pay paypal fees and shipping. Or we can meet for cash in hand exchange. If you want to offer me less, I was originally going to list it for $550. So, I'm pretty firm on the $500. -Mitch

K03 Turbo

Tue, 21 May 2013 20:56:46 -0500

by: Petabell

Description: Relatively low miles K03 (about 60K) with minimal shaft play. Compressor and turbine blades in great shape. Just installed a new K04 so this one has to go.

Molded Rubber Cargo/Trunk Liner

Tue, 21 May 2013 20:45:09 -0500

by: JJDubya

Description: Molded rubber trunk liner for B8 A4/S4 sedan. Genuine Audi part#8K5061180. Excellent condition. No shipping, local pick-up only.... Greater Boston area.

APR STAGE 3 setup

Tue, 21 May 2013 20:15:57 -0500

by: NewDays

Description: For sale: APR stage 3 Garrett GT2871r with about 4k miles on it and very little shaft play. APR stage 3 inconel exhaust manifold (Super high quality, worth 700 easy by itself). Pieces of an intake set up as well as the hot side intercooler pipe with couplers. All oil and coolant lines included. Custom 3 inch downpipe with custom flange from the hot side to the exhaust, V-band including the clamp. intercooler also included, brand new from treadstone, I believe it's a 480 hp core. Also have a vented valve cover if anyone needs it and a turbo blanket Turbo, exhaust manifold, oil/coolant lines, intercooler pipe, intake pieces, downpipe and flange for 2150 All that with intercooler included is 2400 Everything with valve cover is 2450 All OBO

extrude honed intake mani

Tue, 21 May 2013 20:14:01 -0500

by: GrapeBandit

Description: 1.8t intake mani extrued honed intake mani. outside also smoothed down and painted black. $350 obo [url]http://s617.photobucket.com/user/m1racing_2009/library/extrude honed intake mani?sort=3&page=1[/url]

APR STAGE 3 setup

Tue, 21 May 2013 20:13:21 -0500

Magnaflow 14815 / Carbonio Intake

Tue, 21 May 2013 17:57:40 -0500

by: Corzee

Description: Magnaflow 14815, brand new in box. $180 APR Carbonio intake (1.8t). Ran for about 4 months, perfect condition with all pieces. Might as well be brand new. $200 Need to move this stuff asap. PM or text me at 850.819.3989 Thanks!

ST coil overs $550

Tue, 21 May 2013 14:33:47 -0500

by: jakellama123

Description: Up for sale are the ST coil overs off my b7 a4 Paid $875 shipped about a year ago and have put 10-15k miles on them They still look and feel like when they are new and do not make any noises or anything like that. I still have the original box and maybe even receipt Not sure if they would fit on mkv's or mkvi's but its worth looking into. In this picture they are all the way down in the rear with perches in and have 20 threads left up front. More pics upon request Only reason I am selling is because I am putting my b7 back to stock to trade in. Coil's are still on the car but will be removed and cleaned up and ready to ship in the next day or two. Asking $550+ shipping Please call/text for fastest response at 602-748-5459 -Jake WILL ALSO sell stock sport suspension with 50k miles for $175 to save me the hassle of switching out suspension

OEM A4 Eurotrunk - Quartz Grey Metallic

Tue, 21 May 2013 14:30:02 -0500

by: baggednbangin

Description: OEM B7 A4 metal eurotrunk from Germany. Painted quartz grey metallic. Paint is flawless, no scratches. This is the real deal. Not that carbon fiber or fiber glass trunk lid. There are only a couple in this country. This is 1 of 2 that i know of in NJ, or the east coast for that matter. It'll definitely turn heads. I would like for it to be picked up rather then shipped. The reason for this is because I don't want you to receive a damaged eurotrunk lid.

2 Upgraded Snub Mounts

Tue, 21 May 2013 13:04:21 -0500

by: teleTay

Description: i have 2 upgraded snub mounts for sale ------------------ they fit b6/b7 a4/s4 1.8t, 2.0t, 3.0, 3.2, 4.2 ------------------ green - 75 durometer, big improvement over stock, no added vibrations red - 85 durometer, best for cars that are driven hard ------------------ these are a direct replacement over the stock foam mount. they are made of polyurathane they hold everything in much tighter, less engine slop during hard acceleration/driving, makes shifts smoother and yes, it does make a difference on automatic cars ------------------ I am asking $25 shipped, 48 cont usa but make me an offer ------------------ call or text: (801) 556-4324 or email: teletay.88@gmail.com or PM ------------------ if you want to buy through the "buy it now" on this ad, just let me know if you want the green or red

Audi A4 6 CD Changer in perfect working and cosmetic condition

Tue, 21 May 2013 10:35:21 -0500

by: mrjasper3mn

Description: I am selling my cd changer because i don't use it at all and i actually would like to utilize the space it uses in the glove box for something else. The car this cd changer will come from is A4 2006 Quattro which had the RNS-E and the Cd changer installed from the factory. The Cd changer you see in the picture is the same one you will get, i am just waiting to sell it and then i will take it out of the car and ship it to you. Let me know if you have any questions. Thanks

Non s-line front bumper needed

Tue, 21 May 2013 03:44:02 -0500

by: redlegs13m

Description: Let me take your old junk from your overhaul! I need a non s-line front bumper preferrably in light metallic silver. Will drive a couple states in any direction but east if I need to.

stock dv and stock mufflers

Tue, 21 May 2013 01:22:14 -0500

by: p07503p

Description: Have the stock dv up for sale 20 bucks picked up. Perfect Condition. And stock mufflers for 50 for the pair. Prefer picked up but I won't ship the mufflers. Make me an offer by pm or txt me at 8627039646

Precision 750HP Intercooler

Tue, 21 May 2013 01:17:09 -0500

by: Schoolbus4

Description: Up for sale is the Precision 750HP intercooler, is brand new never been used

OEM rubber floor mats

Mon, 20 May 2013 23:40:34 -0500

by: jubei4769

Description: OEM Platinum rubber all weather floor mats. Living in the PNW they got there use. driver side mat is missing one of the black grommets but it does not slide around on the carpet.

Upper Front Grille

Mon, 20 May 2013 22:45:54 -0500

by: Matthew Parker

NEW Roof Spoiler Unpaited Caratere Replica

Mon, 20 May 2013 22:18:47 -0500

by: noyzcij3

Description: Brand new unpainted Caractere replica roof spoiler. Never installed, decided to get the carbon fiber version. Will need to be painted and slightly adjusted before installation. Free shipping within lower 48 states

Walbro 255LPH,Throttle Body,Fuel Filter

Mon, 20 May 2013 22:15:34 -0500

by: macwithdacheese

Description: 034 Downpipe test pipe together NEW 300$ Siemens 80mm hemi throttle body NEW 150$ JEPistons VW 1990-1993 INBOX INFO NEGO Walbro 255LPH NEW 80$ Magnaflow High Flow Catalytic 220$ Forge BLUE turbo inlet pipe NEW 120$ Forge throttle body hose NEW 120$ ECS Tuning Tow hook black NEW 30$ TOP Line OEM Spec Pistons NEW 150$ OEM Fuel Filter NEW 80$ OEM Clutch(with flywheel)100$ USED for 69 miles: Stock catalytic 100$ K03 50$ MAF housing 15$ Intake manifold 100$ Radiator 30$ Stock DV 30$ stock oil feed/return line 50$ A/C Kit 150$

aux electric fan for 1.8

Mon, 20 May 2013 21:01:37 -0500

by: Audiss17

Description: i made this aux fan to replace my clutch fan, but now i am putting some stock parts back in the car (trying to sell) the metal braces line up nice with the outside of the plastic trim of the radiator mount, u can use two rivets and its very sturdy you have like half an inch clearing between the pully, the fan is a stock fan of a 2001 a4 (i used that fan because i know is good quality) the control i bought from summit (check link) and made the harnes and added a fuse for it right where you take the power from the battery. If you have any question let me know, if you buy i will try my best to help install over phone/email/what ever, if you do yourself, anyway i will include wiring instruction what came with the control. thanks for looking http://www.summitracing.com/parts/hda-3647/overview/

new 18" A4 Premium Plus wheels

Mon, 20 May 2013 18:46:38 -0500

by: vibin.vrs

Description: Hey guys, i want to sell my brand new audi 18" wheel set. it came with my 2013 a4 premium plus package. i just used it for a week after my delivery of the car until i switched over to aftermarket wheels. i also have a set of wheel lock kit and audi wheel bolts for sale. Lemme know if anyone is interested.

Engine Snub Mount

Mon, 20 May 2013 17:18:03 -0500

by: ZORT931

Description: Brand new never used ECS tuning engine snub mount. I was going to install it along with several other parts but unfortunately had to sell my Audi.

FS:A8 brake upgrade TT carriers

Mon, 20 May 2013 17:06:28 -0500

by: silvereb80

Description: A8 carries were on my b5 that was totaled. 120 shipped [URL=http://s903.photobucket.com/user/silvereb80/media/2013-05-16124351_zps82f84a1e.jpg.html][IMG]http://i903.photobucket.com/albums/ac231/silvereb80/2013-05-16124351_zps82f84a1e.jpg[/IMG][/URL] [URL=http://s903.photobucket.com/user/silvereb80/media/2013-05-16124441_zps05014369.jpg.html][IMG]http://i903.photobucket.com/albums/ac231/silvereb80/2013-05-16124441_zps05014369.jpg[/IMG][/URL] [URL=http://s903.photobucket.com/user/silvereb80/media/2013-05-16124451_zps53c9d4bc.jpg.html][IMG]http://i903.photobucket.com/albums/ac231/silvereb80/2013-05-16124451_zps53c9d4bc.jpg[/IMG][/URL] Thanks

OEM 5G Ballasts, Osram D1S Bulbs Cables

Mon, 20 May 2013 13:17:33 -0500

by: a4darkness

Description: These ballasts only fit single xenon housings (mounts from below) and will not fit bixenon headlights (mounts in the back). More info + pics here: http://www.lltek.com/PRS_bin/PRS_69_A48E_Ballasts_claire.htm

OEM Bi Xenon HID Headlights / Full Kit (A4 B8)

Mon, 20 May 2013 13:06:17 -0500

by: jmwalm00

Description: I'm looking for Bi-Xenon housings (pair) / preferably a full upgrade kit with ballasts etc. email me at jmwalm00@yahoo.com Thanks in advance!

Mass Air Flow Sensor - Reman'd

Mon, 20 May 2013 12:41:22 -0500

by: noob5

Description: Never installed. Remanufactured Hitachi mass air flow sensor. Audi #078-133-471 EX. This has a 4-pin connection. Also note the shape of the connection which is rounded on one side and squared off on the other. Please verify this fits on your vehicle before purchase. $60 Shipped to the lower 48.

Driver rear s4 doorblade

Mon, 20 May 2013 12:19:19 -0500

by: manguyen

Description: Was going to repaint this to replace my doorblade but ended up finding one already painted my color. I believe this is Ming blue but not 100% sure. Price includes shipping

2001 B5 A4 Part Out! Located, Florida

Mon, 20 May 2013 11:46:22 -0500

by: big-L

Description: Parting out my B5 A4, blew the clutch and engine while visiting my parents in Florida and I dont have the time to fix it because I gotta get back to Canada. Everything is OBO, you pay shipping Performance parts that I have are as follows: - APR stage 1 91oct ecu - Carbonio CAI - Borla Exhaust - High flow cat - Forge 007 DV - Podi boost guage So Far Everything is still on the car.. I will update as parts sell... If you wish to view the part before sale, I am open to showing you them via Skype... Lets get this thing parted out folks, much appreciated. Thank you, Lars

B6 B7 Roof Rack

Mon, 20 May 2013 09:03:54 -0500

by: Irizarry

Description: Audi B6 B7 Roof Rack for sedan Product is used. In great shape, and works as it should. All locks are present. Light scratches on Black feet and towers. Includes: Base bars, two keys & Tool. Shipping to lower 48.

B5 A4 1.8t Holset/Full-Race turbo kit

Mon, 20 May 2013 08:55:18 -0500

by: pac1085

Description: This is a feeler but it will go if I can also find a buyer for the motor. Full-Race longitudinal 1.8t manifold Holset H1C 56mm turbo with Tim's turbos single scroll housing, turbo has about 5k miles on it from a rebuild. oil lines for turbo and fitting for feed/return Custom 3" stainless downpipe with wastegate recirc, wrapped Tial 44mm WG (silver) aluminum exhaust w/ two vibrant mufflers that mates with the downpipe $2300 for the above I also have a Treadstone TR11 intercooler, Tial 50mm bov and piping for this kit that fits behind a S4 bumper which I can include for additional money. I have an S4 bumper painted Europa blue which is cut to fit the intercooler too.. And if you need engine mgmt for this, I have Megasquirt-3 w/ MS3x standalone with an A4 AEB PnP harness. $800

2.0L 1.8t AEB/058 Stroker Motor Long Block

Mon, 20 May 2013 08:53:53 -0500

by: pac1085

Description: Feeler to see if there is any interest in my engine. If so, I'll part out the rest of the car. Block/Head have always been together since the rebuild, both have approx 18k miles on them. Build was done in Aug 2008. Engine was broken in with the "MototuneUSA" break in method and has been running perfect ever since. Most oil changes were done at 2k miles or less, but the last one was around 4k. Currently has fresh Redline 5w40 in it. AEB head casting from a 97 1.8t --Head consists of stock components, and was rebuilt by Drakes. --Also installed new cam chain tensioner ($$) and chain at same time. 058 block casting from a 98 1.8t --Machine work done by Proformance, assembled & grinding for rod clearance by me. --Block was sonic checked (I have the printout) and bored/honed with a torque plate --All of the gaskets and most of the bolts were replaced with new when the engine was built. --Engine painted w/ duplicolor silver engine enamel, but could use a respray - it didnt hold up too well Components: -Forged OBD-I ABA crankshaft -Wiseco custom forged pistons 8.5:1 CR ceramic coated dome/coated skirts. I have the custom order spec sheet. -ALT head gasket -SCAT 144 / 20mm Rods w/ ARP pro series 2000 alloy bolts -Main bearings, rod bearings and I/M shaft bearings coated with swain tech ppm -I/M shaft lightened, balanced and clearanced for stroker by Jarod @ SCCH-Heads -ARP Main Studs $3000 for the long block. I also have some other stuff that can be added on... The car is still fully together and can be driven with it. -Full race 1.8t longitudial manifold, downpipe w/ recirc, tial 44mm wg, etc. -Clutchmasters fx700 twin disc clutch w/ aluminum flywheel (rebuild last summer) -Holset H1c turbo w/ tims turbos housing...fits this motor perfect! -Megasquirt-3 with MS3X and AEB pnp harness

JE PISTONS 82.5MM Scats rods

Mon, 20 May 2013 07:49:35 -0500

by: vietxnam

Description: Scat rods 144x20mm. [$350] JE pistons 82.5mm 9.25:1 [$550] BNIB.

KoR-GT turbo

Mon, 20 May 2013 02:09:00 -0500

by: DavidAAG

Description: Selling my kor-gt turbo nothing wrong with it and in excellent condition. Just put it on last year but want an S4. Help me help u :). Here's the website it's bought from, they are very well known. http://www.raimotorsport.com/RAI-Motorsport-K0R-GT-K04-Turbo-Upgrade-p/rai_b7k0r-gt.htm

Misc. Parts New and Used

Sun, 19 May 2013 22:29:18 -0500

by: ultraleggera a4

Description: I have OEM parts with roughly 50K on them all which are good from a 2006 A4 2.0T stock forged pistons and rods. intake and exhaust valve with springs coil pack (never misfire not even once) pair of halogen bulbs engine cover PCV smic with hoses non s-line filler plate air box air ducts oil filter housing fuel filter 10k on BKR9EIX spark plugs 20 oem silver wheel bolts cover New never used 20 black 5x112 50mm for use with spacers. best offer is all i ask for nothing high.

FCA SLine Rear Valance (For Non-Sline B8)

Sun, 19 May 2013 21:52:39 -0500

by: MSteele

Description: Decided to keep my Votex and sell the FCA group buy valance. It obviously needs prep and paint and there are a couple of small spots that need filing shown in the last pic of the exhaust cut out (click pic). All of the lines are straight especially were the plastic welding took place. Letting it go for less then what I paid for it. I would prefer local pick up but if someone wants it shipped I will get some quotes.

Front Plate Filler

Sun, 19 May 2013 21:16:37 -0500

by: mrbacardi35

Description: Used front plate filler. $100 shipped or best offer.

Euro trunk black

Sun, 19 May 2013 20:01:24 -0500

by: jeffrey146

Description: Euro trunk. call or text (801)-390-9397 its black in color Name is mitch

B6 Belly Pan Diesel Geek Skid Plate Price Negotiable

Sun, 19 May 2013 17:56:25 -0500

by: mannyjfk

Description: Sold the car and no longer need it. Removed and salvaged just about all pieces from the install kit. Maybe missing 3 washers. Price is fully negotiable. Make a decent offer that we both feel happy about and is yours. PM me if interested. ***Fits B5, B6 and B7*** ***Does Not fit S4***

fs: s-line bumper. needs a little work.

Sun, 19 May 2013 17:40:43 -0500

by: 30vQuattro

Description: I bought this awhile back to put on my car but decided to sell it instead. The bumper is cheap because it needs work. It has a hole on the driver side corner. It could be fixed essily, but I lost interest. Look at the pic for refference. I'm not shipping this, local piclup only

fs: s-line bumper. needs a little work.

Sun, 19 May 2013 17:30:48 -0500

B6 A4 3.0L Longblock 71k w/ New Timing Belt

Sun, 19 May 2013 17:24:36 -0500

by: quickspeed

Description: Up for sale I have a 3.0L Longblock from a 2002 A4. Pulled out of a perfectly running and driving car. Car had all service done at dealer prior to my buying it. Just got the car for a project that doest require the 3.0L. Includes everything but harness/ecu, Coil packs, and AC Compressor. Asking $1000 + Shipping to your area. Price will also include a brand new timing belt installed right before shipping. It will have 0 miles on it Also have ECU/Harness/Etc for more.

B7 A4 Stock Fuel Pump / HPFP

Sun, 19 May 2013 17:16:43 -0500

by: p0isin

Description: For Sale is a stock fuel pump from a 2008 Audi A4 2.0T. The pump has about 45xxx miles on it and is in good working condition. I recently bought an APR HPFP and no longer need this one. The cam follower was replaced throughout the pump's life so it's still in good condition.

Audizine

Carbon Fiber SLine Valance

034 Motorsports Turbo Inlet Hose

Bosch 386cc Audi tt225 Injectors (4) BNIB

Need a B7 A4 Front Bumper Shock Passenger side

B6 A4 Halogen Headlight Housings

Kamei Grille - $60 Shipped

Test Pipe / Straight piple & full catback stock Exhaust a4 b7

Carbonio Air Intake

MASSIVE Facelift partout

Custom SMIC and Aluminum Throttle Inlet Pipe w/IAT bung

K03 Turbo

Molded Rubber Cargo/Trunk Liner

APR STAGE 3 setup

extrude honed intake mani

APR STAGE 3 setup

Magnaflow 14815 / Carbonio Intake

ST coil overs $550

OEM A4 Eurotrunk - Quartz Grey Metallic

2 Upgraded Snub Mounts

Audi A4 6 CD Changer in perfect working and cosmetic condition

Non s-line front bumper needed

stock dv and stock mufflers

Precision 750HP Intercooler

OEM rubber floor mats

Upper Front Grille

NEW Roof Spoiler Unpaited Caratere Replica

Walbro 255LPH,Throttle Body,Fuel Filter

aux electric fan for 1.8

new 18" A4 Premium Plus wheels

Engine Snub Mount

FS:A8 brake upgrade TT carriers

OEM 5G Ballasts, Osram D1S Bulbs Cables

OEM Bi Xenon HID Headlights / Full Kit (A4 B8)

Mass Air Flow Sensor - Reman'd

Driver rear s4 doorblade

2001 B5 A4 Part Out! Located, Florida

B6 B7 Roof Rack

B5 A4 1.8t Holset/Full-Race turbo kit

2.0L 1.8t AEB/058 Stroker Motor Long Block

JE PISTONS 82.5MM Scats rods

KoR-GT turbo

Misc. Parts New and Used

FCA SLine Rear Valance (For Non-Sline B8)

Front Plate Filler

Euro trunk black

B6 Belly Pan Diesel Geek Skid Plate **Price Negotiable**

fs: s-line bumper. needs a little work.

fs: s-line bumper. needs a little work.

B6 A4 3.0L Longblock 71k w/ New Timing Belt

B7 A4 Stock Fuel Pump / HPFP

B6 Belly Pan Diesel Geek Skid Plate Price Negotiable